Technical Data Sheets

NECAL 8195 Adhesive

Posted by Ed Johnson on Feb 4, 2011 10:24:00 AM

NECAL 8195 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8195 is a supported pressure sensitive adhesive displaying excellent tack.

Features:
NECAL 8195 will adhere to many substrates.  8195 is highly recommended for rough textured surfaces that have low contact areas.  It can be used where vibration deadening is required.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 32 mil + or – 10%
Scrim: Polyurethane open-celled foam
Adhesion (PSTC-1 std.): 95 - 120 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Foam Products, Low Temperature, Necal Brand Products, Single Coated Foam Tape, Adhesive Transfer Tape, Acrylic PSA Adhesive, Double Coated Tape, High Tack Adhesive, Temperature Resistant, Rough/Uneven Surface Adhesive, Mounting Tape, Double Linered Adhesive Transfer Tapes, Double Coated Foam Tape, Polyester Open Cell Foam

NECAL 8193 Adhesive

Posted by Ed Johnson on Feb 4, 2011 10:12:00 AM

NECAL 8193 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8193 is a supported pressure sensitive adhesive displaying high tack and good creep resistance. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 8193 will adhere to many substrates.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, W, H, HD, J, VF liner
Thickness: Total construction 4.0 mil
Scrim: .00048 mil polyester
Adhesion (PSTC-1 std.): 200-220 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 65 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Bonding Tape, Low Temperature, Necal Brand Products, Adhesive Transfer Tape, Acrylic PSA Adhesive, Double Coated Tape, High Tack Adhesive, UL Approved, UL Recognized, Strong Bond

NECAL 8192 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:25:00 PM

NECAL 8192 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8192 is a white or black foam supported adhesive with superior tack.

Features:
NECAL 8192 is primarily intended for applications with extremely rough substrates such as cast iron, cement, etc.  8192 has excellent impact and vibration resistance.  8192 has excellent adhesion to polyethylene and polypropylene as well as other substrates.

Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 32 mil + or – 10%
Scrim: White Polyethylene closed-cell foam
Adhesion (PSTC-1 std.): 160-170 oz./in., 80-100 to polyethylene and polypropylene
Tensile (Polyester to SS, 1 sq.in.): 65 p.s.i. foam failure
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Foam Products, Low Temperature, Necal Brand Products, Rubber Based, Single Coated Foam Tape, High Tack Adhesive, UL Approved, UL Recognized, Low Surface Energy, Strong Bond, Rough/Uneven Surface Adhesive, White/Black Polyethylene Close Cell Foam

NECAL 7114 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:14:00 PM

NECAL 7114 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 7114 is a unique unsupported heat activated adhesive.

Features:
NECAL 7114  displays high bond strengths to many substrates including vinyl, metal, a variety of plastics and various cloths and leathers.  7114 has excellent environmental resistance.

Physical Properties:
Adhesion: Cloth & vinyl destroying bond
Thickness: Total construction 1.0 mils
Service temperature range: -40°F minimum to 200°F maximum

Bonding Instructions:
Bonding instructions: 4-10 seconds at 325-375°F depending on materials bonded.  Minimum glue line temperature of 300°F and adequate pressure to initiate bonding required.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Adhesive Transfer Tape, Temperature Resistant, VSB (very strong bond), Heat Activated, Thermo Bond Film, Thermo Bond Product

NECAL 5132 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:10:00 PM

NECAL 5132 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5132 is a unique thermoplastic adhesive with excellent bonding characteristics.

Features:
NECAL 5132 is designed to be resistant to blocking, so it needs no release liner.  5132 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene). In addition, 5132 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 8-12 lbs.
Thickness: Total construction 1.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, VSB (very strong bond), Heat Activated, Thermo Bond Film, Thermo Bond Product, Thermo Plastic Adhesive, Gas and Detergent Resistant)

NECAL 5130 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:06:00 PM

NECAL 5130 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5130 is a unique thermoplastic adhesive with excellent bonding characteristics. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 5130 is designed to be resistant to blocking, so it needs no release liner.  5130 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene).  In addition, 5130 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 9-14 lbs.
Thickness: Total construction 2.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, VSB (very strong bond), UL Approved, UL Recognized, Rough/Uneven Surface Adhesive, Heat Activated, Thermo Bond Film, Thermo Bond Product, Thermo Plastic Adhesive, Oil, Gas and Detergent Resistant)

NECAL 4800 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:04:00 PM

NECAL 4800 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4800 is an unsupported film of pressure sensitive adhesive which displays excellent bond and initial tack.

Features:
NECAL 4800 adheres to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness, 4800 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 325 - 350 oz./in. at 4.0 mils
Tensile: 180 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond), Rough/Uneven Surface Adhesive

NECAL 4700 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:01:00 PM

NECAL 4700 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4700 is an unsupported film of pressure sensitive adhesive which displays excellent bond and initial tack.

Features:
NECAL 4700 is designed for bonding to polypropylene and polyethylene.  4700 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 60-75 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)Tensile: 225 p.s.i.
Tensile: 225 p.s.i.
Shear adhesion: 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, VSB (very strong bond), Low Surface Energy

NECAL 4600 Adhesive

Posted by Ed Johnson on Feb 2, 2011 2:58:00 PM

NECAL 4600 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4600 is an unsupported film of pressure sensitive adhesive displaying high tack and good creep resistance.

Features:
NECAL 4600 will adhere to many substrates, supplied as a bubble free film for backlit applications.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion (PSTC-1 std.): 80-85 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Backlit Application, Bubble Free Film

NECAL 4500 Adhesive

Posted by Mitch Larson on Feb 2, 2011 2:56:00 PM

NECAL 4500 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4500 is a high strength, high shear, pressure sensitive adhesive that displays very aggressive initial tack, used only to manufacture label stock.It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 4500 has excellent adhesion to most substrates, including polyethylene and polypropylene.

Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 2.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 80-100 oz./in. | 40 – 50 oz./in. to polyethylene and polypropylene
Tensile: 70 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Rubber Based, High Performance, Label Stock Product, High Tack Adhesive, Performance Label Materials, UL Approved, UL Recognized, Low Surface Energy, Strong Bond

All posts