--- title: Technical Data Pages | UL Recognized description: UL Recognized | --- # [![NECAL Adhesive Systems](https://www.necal.com/hs-fs/file-14830375-jpg/images/Necal-logo.jpg)](https://www.necal.com/)NECAL Adhesive Systems ![](https://www.necal.com/hs-fs/file-14830626-png/images/toll-coating.png) ![](https://www.necal.com/hs-fs/file-14829224-png/images/adhesives.png) ![](https://www.necal.com/hs-fs/file-14830465-png/images/release-liners.png) ![](https://www.necal.com/hs-fs/file-14829330-png/images/converting.png) # Technical Data Sheets ## [NECAL 9210 Adhesive](https://www.necal.com/technical-data-pages/bid/58961/NECAL-9210-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:12:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9210 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835196-doc/docs/9210.doc) #### **Adhesive Description: ** ******** ******NECAL ****9210** is an unsupported film of pressure sensitive adhesive that displays high initial tack and peel. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9210 **will adhere to many substrates including polyethylene and polypropylene. **Physical Properties:**** **Composition: Rubber based Adhesive Release liner: Available with P or W liner Thickness: Total construction 2.0 mils Adhesion: 120 - 140 oz./in. Tensile: 120 p.s.i. Shear adhesion: 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 190°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58961/NECAL-9210-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Rubber Based](https://www.necal.com/technical-data-pages/topic/rubber-based), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9200 Adhesive](https://www.necal.com/technical-data-pages/bid/58960/NECAL-9200-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:09:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9200 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835141-doc/docs/9200.doc) #### **Adhesive Description: ** ******** ******NECAL ****9200 **is an unsupported film of pressure sensitive adhesive that displays high initial tack and peel. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9200 **will adhere to many substrates including polyethylene and polypropylene. **Physical Properties:**** **Composition: Rubber based Adhesive Release liner: Available with P or W liner Thickness: Total construction 2.0 mils Adhesion: 150 - 180 oz./in. Tensile: 100 p.s.i. Shear adhesion: 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 170°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58960/NECAL-9200-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Rubber Based](https://www.necal.com/technical-data-pages/topic/rubber-based), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9180S Adhesive](https://www.necal.com/technical-data-pages/bid/58958/NECAL-9180S-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:07:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9180S **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835037-doc/docs/9180s.doc) #### **Adhesive Description: ** ******** ******NECAL ****9180S **is a supported film of pressure sensitive adhesive displaying high tack and good creep resistance. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9180S **will adhere to many substrates.   The thickness of **9180S** gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.). **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 5.5 mils Scrim: Nonwoven polyester 2.0 mils thick Adhesion (PSTC-1 std.): 320 - 350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 350°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58958/NECAL-9180S-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9180 Adhesive](https://www.necal.com/technical-data-pages/bid/58956/NECAL-9180-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:05:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9180 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834989-doc/docs/9180.doc) #### **Adhesive Description: ** ******** ******NECAL ****9180 **is a supported film of pressure sensitive adhesive displaying high performance bond characteristics as well as outstanding initial tack. **It is UL recognized to Standard UL 969  (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9180 **will adhere to many substrates. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 3.0 mils Scrim: .00048 mil polyester Adhesion (PSTC-1 std.): 220 - 240 oz./in. Tensile (Polyester to SS, 1 sq.in.): 133 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58956/NECAL-9180-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape), [Laminating Adhesive](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) ## [NECAL 9175 Adhesive](https://www.necal.com/technical-data-pages/bid/58955/NECAL-9175-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:02:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9175 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834812-doc/docs/9175.doc) #### **Adhesive Description: ** ******** ******NECAL ****9175 **is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9175 **will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness **9175** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD, or VF liner Thickness: Total construction 4.0 mils Adhesion (PSTC-1 std.): 325 - 350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum Short-term (Minutes/hours): 400°F maximum Long-term (Days/weeks): 300°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58955/NECAL-9175-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Performance Label Materials](https://www.necal.com/technical-data-pages/topic/performance-label-materials), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved), [Multi Purpose](https://www.necal.com/technical-data-pages/topic/multi-purpose), [Laminating Adhesive](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) ## [NECAL 9170 Adhesive](https://www.necal.com/technical-data-pages/bid/58953/NECAL-9170-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 12:57:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9170 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834701-doc/docs/9170.doc) #### **[Adhesive Description: ](https://www.necal.com/hs-fs/file-14834701-doc/docs/9170.doc)** ******** ******NECAL ****9170 **is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack.  It has excellent creep resistance at elevated temperature. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9170 **will adhere to many substrates including aluminum, brass, steel, enamels and plastics such as polystyrene, ABS, and acrylic. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD, or VF liner Thickness: Total construction 2.0 mils Adhesion (PSTC-1 std.): Initial: 80 - 100 oz./in. Aged: 170 – 180 oz./in. Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -20°F minimum Short-term (Minutes/hours): 400°F maximum Long-term (Days/weeks): 300°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58953/NECAL-9170-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved), [Multi Purpose](https://www.necal.com/technical-data-pages/topic/multi-purpose), [Laminating Adhesive](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) ## [NECAL 8193 Adhesive](https://www.necal.com/technical-data-pages/bid/58903/NECAL-8193-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 10:12:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8193** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14832098-doc/docs/8193.doc) #### **Adhesive Description: ** ******** ******NECAL ****8193 **is a supported pressure sensitive adhesive displaying high tack and good creep resistance. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****8193 **will adhere to many substrates. **Physical Properties:**** **Composition: Acrylic based adhesive Release liner: Available with P, W, H, HD, J, VF liner Thickness: Total construction 4.0 mil Scrim: .00048 mil polyester Adhesion (PSTC-1 std.): 200-220 oz./in. Tensile (Polyester to SS, 1 sq.in.): 65 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58903/NECAL-8193-Adhesive#comments-listing) Tags: [Bonding Tape](https://www.necal.com/technical-data-pages/topic/bonding-tape), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond) ## [NECAL 8192 Adhesive](https://www.necal.com/technical-data-pages/bid/58901/NECAL-8192-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 2, 2011 3:25:00 PM - [Tweet](https://twitter.com/share) **NECAL ****8192** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14832051-doc/docs/8192.doc) #### **Adhesive Description: ** ******** ******NECAL ****8192 **is a white or black foam supported adhesive with superior tack. **Features:**** NECAL ****8192 **is primarily intended for applications with extremely rough substrates such as cast iron, cement, etc.  **8192 **has excellent impact and vibration resistance.  **8192** has excellent adhesion to polyethylene and polypropylene as well as other substrates. **Physical Properties:**** **Composition: Rubber based adhesive Release liner: Available with P or W liner Thickness: Total construction 32 mil + or – 10% Scrim: White Polyethylene closed-cell foam Adhesion (PSTC-1 std.): 160-170 oz./in., 80-100 to polyethylene and polypropylene Tensile (Polyester to SS, 1 sq.in.): 65 p.s.i. foam failure Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 170°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58901/NECAL-8192-Adhesive#comments-listing) Tags: [Foam Products](https://www.necal.com/technical-data-pages/topic/foam-products), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Rubber Based](https://www.necal.com/technical-data-pages/topic/rubber-based), [Single Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [White/Black Polyethylene Close Cell Foam](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam) ## [NECAL 5130 Adhesive](https://www.necal.com/technical-data-pages/bid/58896/NECAL-5130-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 2, 2011 3:06:00 PM - [Tweet](https://twitter.com/share) **NECAL ****5130** Heat Activated Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14831798-doc/docs/5130.doc) #### **Adhesive Description: ** ******** ******NECAL ****5130 **is a unique thermoplastic adhesive with excellent bonding characteristics. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****5130 **is designed to be resistant to blocking, so it needs no release liner.  **5130** has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene).  In addition, **5130** has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties. **Physical Properties:**** **Adhesion: Aluminum to ABS 9-14 lbs. Thickness: Total construction 2.5 mils Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i. Service temperature range: -60°F minimum to 190°F maximum **Bonding Instructions:**** **Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58896/NECAL-5130-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Heat Activated](https://www.necal.com/technical-data-pages/topic/heat-activated), [Thermo Bond Film](https://www.necal.com/technical-data-pages/topic/thermo-bond-film), [Thermo Bond Product](https://www.necal.com/technical-data-pages/topic/thermo-bond-product), [Thermo Plastic Adhesive](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive), [Oil](https://www.necal.com/technical-data-pages/topic/oil), [Gas and Detergent Resistant)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) ## [NECAL 4500 Adhesive](https://www.necal.com/technical-data-pages/bid/58890/NECAL-4500-Adhesive) Posted by [Mitch Larson](https://www.necal.com/technical-data-pages/author/mitch-larson) on Feb 2, 2011 2:56:00 PM - [Tweet](https://twitter.com/share) **NECAL ****4500** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14831596-doc/docs/4500.doc) #### **Adhesive Description: ** ******** ******NECAL ****4500 **is a high strength, high shear, pressure sensitive adhesive that displays very aggressive initial tack, used only to manufacture label stock.**It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****4500 **has excellent adhesion to most substrates, including polyethylene and polypropylene. **Physical Properties:**** **Composition: Rubber based adhesive Release liner: Available with P, P1, W or W1 liner Thickness: Total construction 1.0 – 2.0 mils dependent upon application Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar Adhesion: 80-100 oz./in. | 40 – 50 oz./in. to polyethylene and polypropylene Tensile: 70 p.s.i. Shear Adhesion: 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 170°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least one year when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58890/NECAL-4500-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Rubber Based](https://www.necal.com/technical-data-pages/topic/rubber-based), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [Label Stock Product](https://www.necal.com/technical-data-pages/topic/label-stock-product), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Performance Label Materials](https://www.necal.com/technical-data-pages/topic/performance-label-materials), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond) [All posts](https://www.necal.com/technical-data-pages/all) [Next](https://www.necal.com/technical-data-pages/topic/ul-recognized/page/2) ### Browse by Tag - [Acrylic PSA Adhesive (66)](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive) - [Adhesive Transfer Tape (37)](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape) - [Automotive Approved (21)](https://www.necal.com/technical-data-pages/topic/automotive-approved) - [Backlit Application (2)](https://www.necal.com/technical-data-pages/topic/backlit-application) - [Black Polyethylene Foam (1)](https://www.necal.com/technical-data-pages/topic/black-polyethylene-foam) - [Black Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam) - [Bonding Tape (3)](https://www.necal.com/technical-data-pages/topic/bonding-tape) - [Bubble Free Film (2)](https://www.necal.com/technical-data-pages/topic/bubble-free-film) - [Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/die-cut-friendly) - [Differential Tape (6)](https://www.necal.com/technical-data-pages/topic/differential-tape) - [Double Coated Foam Tape (25)](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape) - [Double Coated Tape (34)](https://www.necal.com/technical-data-pages/topic/double-coated-tape) - [Double Linered Adhesive Transfer Tapes (3)](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes) - [Foam Products (28)](https://www.necal.com/technical-data-pages/topic/foam-products) - [Gas and Detergent Resistant) (2)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) - [General Purpose (6)](https://www.necal.com/technical-data-pages/topic/general-purpose) - [Heat Activated (3)](https://www.necal.com/technical-data-pages/topic/heat-activated) - [High Performance (23)](https://www.necal.com/technical-data-pages/topic/high-performance) - [High Performance Polyester Mask (3)](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask) - [High Tack Adhesive (63)](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive) - [Label Stock Product (8)](https://www.necal.com/technical-data-pages/topic/label-stock-product) - [Laminating Adhesive (3)](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) - [Low Surface Energy (22)](https://www.necal.com/technical-data-pages/topic/low-surface-energy) - [Low Temperature (64)](https://www.necal.com/technical-data-pages/topic/low-temperature) - [Membrane Switch Spacer (1)](https://www.necal.com/technical-data-pages/topic/membrane-switch-spacer) - [Mounting Tape (30)](https://www.necal.com/technical-data-pages/topic/mounting-tape) - [Multi Purpose (3)](https://www.necal.com/technical-data-pages/topic/multi-purpose) - [Necal Brand Products (76)](https://www.necal.com/technical-data-pages/topic/necal-brand-products) - [Oil (1)](https://www.necal.com/technical-data-pages/topic/oil) - [open-cell polyurethane (1)](https://www.necal.com/technical-data-pages/topic/open-cell-polyurethane) - [Performance Label Materials (8)](https://www.necal.com/technical-data-pages/topic/performance-label-materials) - [Polyester Open Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyester-open-cell-foam) - [Polyethylene Closed-cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyethylene-closed-cell-foam) - [Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) - [Printable Film (1)](https://www.necal.com/technical-data-pages/topic/printable-film) - [Protective Tape Product (3)](https://www.necal.com/technical-data-pages/topic/protective-tape-product) - [Removable Adhesive (6)](https://www.necal.com/technical-data-pages/topic/removable-adhesive) - [Removable Tape (6)](https://www.necal.com/technical-data-pages/topic/removable-tape) - [Repositionable Tape (1)](https://www.necal.com/technical-data-pages/topic/repositionable-tape) - [Residue Free (6)](https://www.necal.com/technical-data-pages/topic/residue-free) - [Rough/Uneven Surface Adhesive (34)](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive) - [Rubber Based (7)](https://www.necal.com/technical-data-pages/topic/rubber-based) - [Single Coated Foam Tape (26)](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape) - [Strong Bond (25)](https://www.necal.com/technical-data-pages/topic/strong-bond) - [Temperature Resistant (40)](https://www.necal.com/technical-data-pages/topic/temperature-resistant) - [Thermo Bond Film (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-film) - [Thermo Bond Product (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-product) - [Thermo Plastic Adhesive (2)](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive) - [UL Approved (11)](https://www.necal.com/technical-data-pages/topic/ul-approved) - [UL Recognized (11)](https://www.necal.com/technical-data-pages/topic/ul-recognized) - [Very Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly) - [VSB (very strong bond) (36)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond) - [White (1)](https://www.necal.com/technical-data-pages/topic/white) - [White/Black (1)](https://www.necal.com/technical-data-pages/topic/whiteblack) - [White/Black Polyethylene Close Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam) © 2015 Necal Corporation - All Rights Reserved