--- title: Technical Data Pages | Thermo Bond Film description: Thermo Bond Film | --- # [![NECAL Adhesive Systems](https://www.necal.com/hs-fs/file-14830375-jpg/images/Necal-logo.jpg)](https://www.necal.com/)NECAL Adhesive Systems ![](https://www.necal.com/hs-fs/file-14830626-png/images/toll-coating.png) ![](https://www.necal.com/hs-fs/file-14829224-png/images/adhesives.png) ![](https://www.necal.com/hs-fs/file-14830465-png/images/release-liners.png) ![](https://www.necal.com/hs-fs/file-14829330-png/images/converting.png) # Technical Data Sheets ## [NECAL 7114 Adhesive](https://www.necal.com/technical-data-pages/bid/58899/NECAL-7114-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 2, 2011 3:14:00 PM - [Tweet](https://twitter.com/share) **NECAL ****7114** Heat Activated Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14831967-doc/docs/7114.doc) #### **Adhesive Description: ** ******** ******NECAL ****7114** is a unique unsupported heat activated adhesive. **Features:**** NECAL ****7114 ** displays high bond strengths to many substrates including vinyl, metal, a variety of plastics and various cloths and leathers.  **7114 **has excellent environmental resistance. **Physical Properties:**** **Adhesion: Cloth & vinyl destroying bond Thickness: Total construction 1.0 mils Service temperature range: -40°F minimum to 200°F maximum **Bonding Instructions:**** **Bonding instructions: 4-10 seconds at 325-375°F depending on materials bonded.  Minimum glue line temperature of 300°F and adequate pressure to initiate bonding required. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58899/NECAL-7114-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Heat Activated](https://www.necal.com/technical-data-pages/topic/heat-activated), [Thermo Bond Film](https://www.necal.com/technical-data-pages/topic/thermo-bond-film), [Thermo Bond Product](https://www.necal.com/technical-data-pages/topic/thermo-bond-product) ## [NECAL 5132 Adhesive](https://www.necal.com/technical-data-pages/bid/58897/NECAL-5132-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 2, 2011 3:10:00 PM - [Tweet](https://twitter.com/share) **NECAL ****5132** Heat Activated Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14831859-doc/docs/5132.doc) #### **Adhesive Description: ** ******** ******NECAL ****5132** is a unique thermoplastic adhesive with excellent bonding characteristics. **Features:**** NECAL ****5132 **is designed to be resistant to blocking, so it needs no release liner.  **5132** has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene). In addition, **5132** has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties. **Physical Properties:**** **Adhesion: Aluminum to ABS 8-12 lbs. Thickness: Total construction 1.5 mils Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i. Service temperature range: -60°F minimum to 190°F maximum **Bonding Instructions:**** **Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58897/NECAL-5132-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Heat Activated](https://www.necal.com/technical-data-pages/topic/heat-activated), [Thermo Bond Film](https://www.necal.com/technical-data-pages/topic/thermo-bond-film), [Thermo Bond Product](https://www.necal.com/technical-data-pages/topic/thermo-bond-product), [Thermo Plastic Adhesive](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive), [Gas and Detergent Resistant)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) ## [NECAL 5130 Adhesive](https://www.necal.com/technical-data-pages/bid/58896/NECAL-5130-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 2, 2011 3:06:00 PM - [Tweet](https://twitter.com/share) **NECAL ****5130** Heat Activated Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14831798-doc/docs/5130.doc) #### **Adhesive Description: ** ******** ******NECAL ****5130 **is a unique thermoplastic adhesive with excellent bonding characteristics. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****5130 **is designed to be resistant to blocking, so it needs no release liner.  **5130** has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene).  In addition, **5130** has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties. **Physical Properties:**** **Adhesion: Aluminum to ABS 9-14 lbs. Thickness: Total construction 2.5 mils Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i. Service temperature range: -60°F minimum to 190°F maximum **Bonding Instructions:**** **Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58896/NECAL-5130-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Heat Activated](https://www.necal.com/technical-data-pages/topic/heat-activated), [Thermo Bond Film](https://www.necal.com/technical-data-pages/topic/thermo-bond-film), [Thermo Bond Product](https://www.necal.com/technical-data-pages/topic/thermo-bond-product), [Thermo Plastic Adhesive](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive), [Oil](https://www.necal.com/technical-data-pages/topic/oil), [Gas and Detergent Resistant)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) [All posts](https://www.necal.com/technical-data-pages/all) ### Browse by Tag - [Acrylic PSA Adhesive (66)](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive) - [Adhesive Transfer Tape (37)](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape) - [Automotive Approved (21)](https://www.necal.com/technical-data-pages/topic/automotive-approved) - [Backlit Application (2)](https://www.necal.com/technical-data-pages/topic/backlit-application) - [Black Polyethylene Foam (1)](https://www.necal.com/technical-data-pages/topic/black-polyethylene-foam) - [Black Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam) - [Bonding Tape (3)](https://www.necal.com/technical-data-pages/topic/bonding-tape) - [Bubble Free Film (2)](https://www.necal.com/technical-data-pages/topic/bubble-free-film) - [Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/die-cut-friendly) - [Differential Tape (6)](https://www.necal.com/technical-data-pages/topic/differential-tape) - [Double Coated Foam Tape (25)](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape) - [Double Coated Tape (34)](https://www.necal.com/technical-data-pages/topic/double-coated-tape) - [Double Linered Adhesive Transfer Tapes (3)](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes) - [Foam Products (28)](https://www.necal.com/technical-data-pages/topic/foam-products) - [Gas and Detergent Resistant) (2)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) - [General Purpose (6)](https://www.necal.com/technical-data-pages/topic/general-purpose) - [Heat Activated (3)](https://www.necal.com/technical-data-pages/topic/heat-activated) - [High Performance (23)](https://www.necal.com/technical-data-pages/topic/high-performance) - [High Performance Polyester Mask (3)](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask) - [High Tack Adhesive (63)](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive) - [Label Stock Product (8)](https://www.necal.com/technical-data-pages/topic/label-stock-product) - [Laminating Adhesive (3)](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) - [Low Surface Energy (22)](https://www.necal.com/technical-data-pages/topic/low-surface-energy) - [Low Temperature (64)](https://www.necal.com/technical-data-pages/topic/low-temperature) - [Membrane Switch Spacer (1)](https://www.necal.com/technical-data-pages/topic/membrane-switch-spacer) - [Mounting Tape (30)](https://www.necal.com/technical-data-pages/topic/mounting-tape) - [Multi Purpose (3)](https://www.necal.com/technical-data-pages/topic/multi-purpose) - [Necal Brand Products (76)](https://www.necal.com/technical-data-pages/topic/necal-brand-products) - [Oil (1)](https://www.necal.com/technical-data-pages/topic/oil) - [open-cell polyurethane (1)](https://www.necal.com/technical-data-pages/topic/open-cell-polyurethane) - [Performance Label Materials (8)](https://www.necal.com/technical-data-pages/topic/performance-label-materials) - [Polyester Open Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyester-open-cell-foam) - [Polyethylene Closed-cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyethylene-closed-cell-foam) - [Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) - [Printable Film (1)](https://www.necal.com/technical-data-pages/topic/printable-film) - [Protective Tape Product (3)](https://www.necal.com/technical-data-pages/topic/protective-tape-product) - [Removable Adhesive (6)](https://www.necal.com/technical-data-pages/topic/removable-adhesive) - [Removable Tape (6)](https://www.necal.com/technical-data-pages/topic/removable-tape) - [Repositionable Tape (1)](https://www.necal.com/technical-data-pages/topic/repositionable-tape) - [Residue Free (6)](https://www.necal.com/technical-data-pages/topic/residue-free) - [Rough/Uneven Surface Adhesive (34)](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive) - [Rubber Based (7)](https://www.necal.com/technical-data-pages/topic/rubber-based) - [Single Coated Foam Tape (26)](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape) - [Strong Bond (25)](https://www.necal.com/technical-data-pages/topic/strong-bond) - [Temperature Resistant (40)](https://www.necal.com/technical-data-pages/topic/temperature-resistant) - [Thermo Bond Film (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-film) - [Thermo Bond Product (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-product) - [Thermo Plastic Adhesive (2)](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive) - [UL Approved (11)](https://www.necal.com/technical-data-pages/topic/ul-approved) - [UL Recognized (11)](https://www.necal.com/technical-data-pages/topic/ul-recognized) - [Very Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly) - [VSB (very strong bond) (36)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond) - [White (1)](https://www.necal.com/technical-data-pages/topic/white) - [White/Black (1)](https://www.necal.com/technical-data-pages/topic/whiteblack) - [White/Black Polyethylene Close Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam) © 2015 Necal Corporation - All Rights Reserved