Technical Data Sheets

NECAL 7114 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:14:00 PM

NECAL 7114 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 7114 is a unique unsupported heat activated adhesive.

Features:
NECAL 7114  displays high bond strengths to many substrates including vinyl, metal, a variety of plastics and various cloths and leathers.  7114 has excellent environmental resistance.

Physical Properties:
Adhesion: Cloth & vinyl destroying bond
Thickness: Total construction 1.0 mils
Service temperature range: -40°F minimum to 200°F maximum

Bonding Instructions:
Bonding instructions: 4-10 seconds at 325-375°F depending on materials bonded.  Minimum glue line temperature of 300°F and adequate pressure to initiate bonding required.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Adhesive Transfer Tape, Temperature Resistant, VSB (very strong bond), Heat Activated, Thermo Bond Film, Thermo Bond Product

NECAL 5132 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:10:00 PM

NECAL 5132 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5132 is a unique thermoplastic adhesive with excellent bonding characteristics.

Features:
NECAL 5132 is designed to be resistant to blocking, so it needs no release liner.  5132 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene). In addition, 5132 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 8-12 lbs.
Thickness: Total construction 1.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, VSB (very strong bond), Heat Activated, Thermo Bond Film, Thermo Bond Product, Thermo Plastic Adhesive, Gas and Detergent Resistant)

NECAL 5130 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:06:00 PM

NECAL 5130 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5130 is a unique thermoplastic adhesive with excellent bonding characteristics. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 5130 is designed to be resistant to blocking, so it needs no release liner.  5130 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene).  In addition, 5130 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 9-14 lbs.
Thickness: Total construction 2.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, VSB (very strong bond), UL Approved, UL Recognized, Rough/Uneven Surface Adhesive, Heat Activated, Thermo Bond Film, Thermo Bond Product, Thermo Plastic Adhesive, Oil, Gas and Detergent Resistant)

All posts