Technical Data Sheets

NECAL Label Stock

Posted by Ed Johnson on Feb 4, 2011 1:45:00 PM

NECAL Label Stock      Print Friendly Version

Adhesive Description:

NECAL Label Stock is made up of various combinations of face stocks, adhesives and 90 lb. layflat release liner which are manufactured to meet customer requirements.

Features:
NECAL Label Stock can be manufactured using a variety of Pressure Sensitive Adhesives, which include high temperature acrylic, low surface tension acrylic, a rubber base, general purpose acrylic and others.  It can be supplied with a variety of face stocks, which can include: .001 Brite Chrome PET, .0055 Brite or Brushed Chrome PET, .002 Brite or Brushed Chrome PET, .008 Brite or Brushed Chrome PET.  Other face stocks that those listed above may also be available.

Physical Properties:
Composition: Acrylic or Rubber Based Adhesive
Release liner: 90 lb. polycoated release liner
Thickness: Can range from ½ mil to 4 mils thick dependent upon the application.
Adhesion: Dependent upon adhesive utilized
Tensile: Dependent upon adhesive utilized
Shear adhesion: Dependent upon adhesive utilized
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum, Maximum temperature is dependent upon Adhesive utilized

Bonding Instructions:
Remove the release liner and apply to clean, dry substrate.  Use of air, hydraulic or mechanical bonding press is recommended with a pressure of 40-60 P.S.I. with a dwell time of 2 – 5 seconds to insure intimate contact is achieved between nameplate and substrate.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: General Purpose, Necal Brand Products, Rubber Based, Acrylic PSA Adhesive, Label Stock Product, Performance Label Materials, Printable Film

NECAL 9175 Adhesive

Posted by Ed Johnson on Feb 4, 2011 1:02:00 PM

NECAL 9175 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9175 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 9175 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness 9175 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 325 - 350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum
Short-term (Minutes/hours): 400°F maximum
Long-term (Days/weeks): 300°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Adhesive Transfer Tape, Acrylic PSA Adhesive, Double Coated Tape, High Performance, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond), UL Approved, UL Recognized, Low Surface Energy, Mounting Tape, Automotive Approved, Multi Purpose, Laminating Adhesive

NECAL 4800 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:04:00 PM

NECAL 4800 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4800 is an unsupported film of pressure sensitive adhesive which displays excellent bond and initial tack.

Features:
NECAL 4800 adheres to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness, 4800 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 325 - 350 oz./in. at 4.0 mils
Tensile: 180 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond), Rough/Uneven Surface Adhesive

NECAL 4700 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:01:00 PM

NECAL 4700 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4700 is an unsupported film of pressure sensitive adhesive which displays excellent bond and initial tack.

Features:
NECAL 4700 is designed for bonding to polypropylene and polyethylene.  4700 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 60-75 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)Tensile: 225 p.s.i.
Tensile: 225 p.s.i.
Shear adhesion: 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, VSB (very strong bond), Low Surface Energy

NECAL 4600 Adhesive

Posted by Ed Johnson on Feb 2, 2011 2:58:00 PM

NECAL 4600 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4600 is an unsupported film of pressure sensitive adhesive displaying high tack and good creep resistance.

Features:
NECAL 4600 will adhere to many substrates, supplied as a bubble free film for backlit applications.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion (PSTC-1 std.): 80-85 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Backlit Application, Bubble Free Film

NECAL 4500 Adhesive

Posted by Mitch Larson on Feb 2, 2011 2:56:00 PM

NECAL 4500 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4500 is a high strength, high shear, pressure sensitive adhesive that displays very aggressive initial tack, used only to manufacture label stock.It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 4500 has excellent adhesion to most substrates, including polyethylene and polypropylene.

Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 2.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 80-100 oz./in. | 40 – 50 oz./in. to polyethylene and polypropylene
Tensile: 70 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Rubber Based, High Performance, Label Stock Product, High Tack Adhesive, Performance Label Materials, UL Approved, UL Recognized, Low Surface Energy, Strong Bond

NECAL 4003 Adhesive

Posted by Ed Johnson on Feb 2, 2011 2:54:00 PM

NECAL 4003 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4003 is an unsupported film of pressure sensitive adhesive which displays very high tack and superior bond.

Features:
NECAL 4003 will adhere to many substrates.  It will bond to engineering plastics.  4003’s aggressive initial bond builds into a superior bond.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 2.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 80-100 oz./in.
Tensile: 100 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 300°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, High Performance, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond)

NECAL 4001 Adhesive

Posted by Ed Johnson on Feb 2, 2011 2:40:00 PM

NECAL 4001 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4001 is an unsupported film of pressure sensitive adhesive which displays very high tack and superior bond, used only to manufacture label stock. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 4001 will adhere to many substrates.  It will bond to engineering plastics.  4001’s aggressive initial bond builds into a superior bond.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 2.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 80-100 oz./in.
Tensile: 100 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond), UL Approved, UL Recognized

All posts