NECAL Label Stock      Print Friendly Version

Adhesive Description:

NECAL Label Stock is made up of various combinations of face stocks, adhesives and 90 lb. layflat release liner which are manufactured to meet customer requirements.

Features:
NECAL Label Stock can be manufactured using a variety of Pressure Sensitive Adhesives, which include high temperature acrylic, low surface tension acrylic, a rubber base, general purpose acrylic and others.  It can be supplied with a variety of face stocks, which can include: .001 Brite Chrome PET, .0055 Brite or Brushed Chrome PET, .002 Brite or Brushed Chrome PET, .008 Brite or Brushed Chrome PET.  Other face stocks that those listed above may also be available.

Physical Properties:
Composition: Acrylic or Rubber Based Adhesive
Release liner: 90 lb. polycoated release liner
Thickness: Can range from ½ mil to 4 mils thick dependent upon the application.
Adhesion: Dependent upon adhesive utilized
Tensile: Dependent upon adhesive utilized
Shear adhesion: Dependent upon adhesive utilized
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum, Maximum temperature is dependent upon Adhesive utilized

Bonding Instructions:
Remove the release liner and apply to clean, dry substrate.  Use of air, hydraulic or mechanical bonding press is recommended with a pressure of 40-60 P.S.I. with a dwell time of 2 – 5 seconds to insure intimate contact is achieved between nameplate and substrate.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.