NECAL 9180 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9180 is a supported film of pressure sensitive adhesive displaying high performance bond characteristics as well as outstanding initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).
Features:
NECAL 9180 will adhere to many substrates.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 3.0 mils
Scrim: .00048 mil polyester
Adhesion (PSTC-1 std.): 220 - 240 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 133 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Performance,
High Tack Adhesive,
UL Approved,
UL Recognized,
Strong Bond,
Mounting Tape,
Laminating Adhesive
NECAL 9175 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9175 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).
Features:
NECAL 9175 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic. Because of its thickness 9175 is recommended for use on rough surfaces.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 325 - 350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum
Short-term (Minutes/hours): 400°F maximum
Long-term (Days/weeks): 300°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Performance,
High Tack Adhesive,
Performance Label Materials,
Temperature Resistant,
VSB (very strong bond),
UL Approved,
UL Recognized,
Low Surface Energy,
Mounting Tape,
Automotive Approved,
Multi Purpose,
Laminating Adhesive
NECAL 8899-125 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-125 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-125 is primarily intended for use where extreme high performance is needed. 8899-125 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 130 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-110 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-110 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-110 is primarily intended for use where extreme high performance is needed. 8899-110 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 112 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-90 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-90 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-90 is primarily intended for use where extreme high performance is needed. 8899-90 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 92 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-75 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-75 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-75 is primarily intended for use where extreme high performance is needed. 8899-75 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 80 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-60 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-60 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-60 is primarily intended for use where extreme high performance is needed. 8899-60 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 65 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-45 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-45 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-45 is primarily intended for use where extreme high performance is needed. 8899-45 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 48 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-30 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-30 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-30 is primarily intended for use where extreme high performance is needed. 8899-30 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 38 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam
NECAL 8899-15 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-15 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-15 is primarily intended for use where extreme high performance is needed. 8899-15 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 20 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Mounting Tape,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
