NECAL B340-3220 Removable Pressure Sensitive Adhesive Protective Face Mask

Print Friendly Version

Adhesive Description:

NECAL B340-3220 is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface.

Bonding Instructions:
Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9880 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9880 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.

Features:
NECAL 9880 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness 9880 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 10.0 mils
Adhesion (PSTC-1 std.): 375 - 400 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9502 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9502 is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component-Marking and Labeling System Materials)

Features:
NECAL 9502 is designed for polypropylene and polyethylene.  9502 adheres to many other substrates.  Because of it’s thickness 9502 is recommended for use on rough surfaces.

Physical Properties:
Composition: Modified Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 225 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F  to 270°F

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9475 Pressure Sensitive Adhesive     

Adhesive Description:

NECAL 9475 is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 9475 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness 9475 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Scrim: 1.0 mil polyester
Adhesion (PSTC-1 std.): 325 - 350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 14 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 250°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9175 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9175 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 9175 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness 9175 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 325 - 350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum
Short-term (Minutes/hours): 400°F maximum
Long-term (Days/weeks): 300°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9170 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9170 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack.  It has excellent creep resistance at elevated temperature. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 9170 will adhere to many substrates including aluminum, brass, steel, enamels and plastics such as polystyrene, ABS, and acrylic.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): Initial: 80 - 100 oz./in. Aged: 170 – 180 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum
Short-term (Minutes/hours): 400°F maximum
Long-term (Days/weeks): 300°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9074 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9074 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack.

Features:
NECAL 9074 will adhere to many substrates, including aluminum, brass, steel, glass, enamels and most plastics.  9074 has excellent resistance to high temperatures.  Good initial bond will improve to a superior bond within hours or days after application.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 80 - 100 oz./in.
                           Aged: 170-180 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 60°F Minimum
Service temperature range: -40°F minimum to 400°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 8799-45 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8799-45 is a foam supported pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 8799-45 is designed for polypropylene and polyethylene.  8799-45 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P or W liner
Thickness: Total construction 48 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425-500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 8799-30 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8799-30 is a foam supported pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 8799-30 is designed for polypropylene and polyethylene.  8799-30 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P or W liner
Thickness: Total construction 38 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425-500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 8799-15 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8799-15 is a foam supported pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 8799-15 is designed for polypropylene and polyethylene.  8799-15 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P or W liner
Thickness: Total construction 20 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425-500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F  to 270°F

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.