NECAL 8370 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8370 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8370 will adhere to many substrates.
Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 3 mils
Scrim: 48 gauge polyester
Adhesion (PSTC-1 std.): 65 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 170 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 350°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Mounting Tape
NECAL 8585 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8585 is a supported pressure sensitive adhesive displaying excellent bond and initial tack.
Features:
NECAL 8585 is designed for polypropylene and polyethylene. 8585 adheres to many other substrates.
Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 6.0 mils
Scrim: .00048 Polyester
Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425 - 500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Mounting Tape
NECAL 9880 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9880 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.
Features:
NECAL 9880 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic. Because of its thickness 9880 is recommended for use on rough surfaces.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 10.0 mils
Adhesion (PSTC-1 std.): 375 - 400 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Mounting Tape,
Automotive Approved
NECAL 9878 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9878 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.
Features:
NECAL 9878 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic. Because of its thickness 9878 is recommended for use on rough surfaces.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 8.0 mils
Adhesion (PSTC-1 std.): 350 - 375 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Mounting Tape
NECAL 9876 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9876 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.
Features:
NECAL 9876 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic. Because of its thickness 9876 is recommended for use on rough surfaces.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 6.0 mils
Adhesion (PSTC-1 std.): 350 - 375 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Mounting Tape
NECAL 9820 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9820 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and superior tack.
Features:
NECAL 9820 will adhere to many difficult substrates, excluding polyethylene and polypropylene. It will bond to Celcon, Nylon, Etc. Aggressive initial bond builds into a superior bond.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): 250 - 280 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): (250 g./sq.in.) 6 days
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Mounting Tape
NECAL 9512 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9512 is a supported film of pressure sensitive adhesive displaying excellent bond and initial tack.
Features:
NECAL 9512 is designed for polypropylene and polyethylene. 9512 adheres to many other substrates. Because of its thickness 9512 is recommended for use on rough surfaces. It has excellent die-cutting properties.
Physical Properties:
Composition: Modified Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Scrim: .00048 mil Polyester
Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 225 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Mounting Tape,
Die Cut Friendly,
Very Die Cut Friendly
NECAL 9502 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9502 is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component-Marking and Labeling System Materials)
Features:
NECAL 9502 is designed for polypropylene and polyethylene. 9502 adheres to many other substrates. Because of it’s thickness 9502 is recommended for use on rough surfaces.
Physical Properties:
Composition: Modified Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 225 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Mounting Tape,
Automotive Approved
NECAL 9501 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9501 is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component-Marking and Labeling System Materials).
Features:
NECAL 9501 is designed for polypropylene and polyethylene. 9501 adheres to many other substrates.
Physical Properties:
Composition: Modified Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): 60 - 75 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 210 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Mounting Tape
NECAL 9475 Pressure Sensitive Adhesive
Adhesive Description:
NECAL 9475 is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack.
Features:
NECAL 9475 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic. Because of its thickness 9475 is recommended for use on rough surfaces.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Scrim: 1.0 mil polyester
Adhesion (PSTC-1 std.): 325 - 350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 14 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 250°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Mounting Tape,
Automotive Approved
