NECAL 8370 Supported Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8370 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.

Features:
NECAL 8370 will adhere to many substrates.

Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 3 mils
Scrim: 48 gauge polyester
Adhesion (PSTC-1 std.): 65 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 170 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 350°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 8585 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8585 is a supported pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 8585 is designed for polypropylene and polyethylene.  8585 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 6.0 mils
Scrim: .00048 Polyester
Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425 - 500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL Label Stock      Print Friendly Version

Adhesive Description:

NECAL Label Stock is made up of various combinations of face stocks, adhesives and 90 lb. layflat release liner which are manufactured to meet customer requirements.

Features:
NECAL Label Stock can be manufactured using a variety of Pressure Sensitive Adhesives, which include high temperature acrylic, low surface tension acrylic, a rubber base, general purpose acrylic and others.  It can be supplied with a variety of face stocks, which can include: .001 Brite Chrome PET, .0055 Brite or Brushed Chrome PET, .002 Brite or Brushed Chrome PET, .008 Brite or Brushed Chrome PET.  Other face stocks that those listed above may also be available.

Physical Properties:
Composition: Acrylic or Rubber Based Adhesive
Release liner: 90 lb. polycoated release liner
Thickness: Can range from ½ mil to 4 mils thick dependent upon the application.
Adhesion: Dependent upon adhesive utilized
Tensile: Dependent upon adhesive utilized
Shear adhesion: Dependent upon adhesive utilized
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum, Maximum temperature is dependent upon Adhesive utilized

Bonding Instructions:
Remove the release liner and apply to clean, dry substrate.  Use of air, hydraulic or mechanical bonding press is recommended with a pressure of 40-60 P.S.I. with a dwell time of 2 – 5 seconds to insure intimate contact is achieved between nameplate and substrate.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL B340-3220 Removable Pressure Sensitive Adhesive Protective Face Mask

Print Friendly Version

Adhesive Description:

NECAL B340-3220 is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface.

Bonding Instructions:
Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL B001-3220 Removable Pressure Sensitive Adhesive Protective Face Mask

Print Friendly Version

Adhesive Description:

NECAL B001-3220 is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface.

Bonding Instructions:
Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL B340-3220 Removable Pressure Sensitive Adhesive Protective Face Mask

Print Friendly Version

Adhesive Description:

NECAL B340-3220 is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface.

Bonding Instructions:
Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9880 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9880 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.

Features:
NECAL 9880 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness 9880 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 10.0 mils
Adhesion (PSTC-1 std.): 375 - 400 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9878 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9878 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.

Features:
NECAL 9878 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness 9878 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 8.0 mils
Adhesion (PSTC-1 std.): 350 - 375 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9876 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9876 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack.

Features:
NECAL 9876 will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness 9876 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD or VF liner
Thickness: Total construction 6.0 mils
Adhesion (PSTC-1 std.): 350 - 375 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

NECAL 9820 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9820 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and superior tack.

Features:
NECAL 9820 will adhere to many difficult substrates, excluding polyethylene and polypropylene.  It will bond to Celcon, Nylon, Etc.  Aggressive initial bond builds into a superior bond.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): 250 - 280 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): (250 g./sq.in.) 6 days
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.