NECAL 8370 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8370 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8370 will adhere to many substrates.
Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 3 mils
Scrim: 48 gauge polyester
Adhesion (PSTC-1 std.): 65 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 170 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 350°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Mounting Tape
NECAL 9210 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9210 is an unsupported film of pressure sensitive adhesive that displays high initial tack and peel. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).
Features:
NECAL 9210 will adhere to many substrates including polyethylene and polypropylene.
Physical Properties:
Composition: Rubber based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion: 120 - 140 oz./in.
Tensile: 120 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 190°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Rubber Based,
Adhesive Transfer Tape,
Double Coated Tape,
High Tack Adhesive,
UL Approved,
UL Recognized,
Low Surface Energy,
Strong Bond,
Mounting Tape
NECAL 9200 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9200 is an unsupported film of pressure sensitive adhesive that displays high initial tack and peel. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).
Features:
NECAL 9200 will adhere to many substrates including polyethylene and polypropylene.
Physical Properties:
Composition: Rubber based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion: 150 - 180 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Rubber Based,
Adhesive Transfer Tape,
Double Coated Tape,
High Tack Adhesive,
UL Approved,
UL Recognized,
Low Surface Energy,
Strong Bond,
Mounting Tape
NECAL 9180 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9180 is a supported film of pressure sensitive adhesive displaying high performance bond characteristics as well as outstanding initial tack. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).
Features:
NECAL 9180 will adhere to many substrates.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 3.0 mils
Scrim: .00048 mil polyester
Adhesion (PSTC-1 std.): 220 - 240 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 133 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Performance,
High Tack Adhesive,
UL Approved,
UL Recognized,
Strong Bond,
Mounting Tape,
Laminating Adhesive
NECAL 9173 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9173 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack.
Features:
NECAL 9173 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): 162 - 175 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Mounting Tape
NECAL 9170 Pressure Sensitive Adhesive Print Friendly Version
NECAL 9170 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack. It has excellent creep resistance at elevated temperature. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).
Features:
NECAL 9170 will adhere to many substrates including aluminum, brass, steel, enamels and plastics such as polystyrene, ABS, and acrylic.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): Initial: 80 - 100 oz./in. Aged: 170 – 180 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum
Short-term (Minutes/hours): 400°F maximum
Long-term (Days/weeks): 300°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
UL Approved,
UL Recognized,
Low Surface Energy,
Strong Bond,
Mounting Tape,
Automotive Approved,
Multi Purpose,
Laminating Adhesive
NECAL 9074 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9074 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack.
Features:
NECAL 9074 will adhere to many substrates, including aluminum, brass, steel, glass, enamels and most plastics. 9074 has excellent resistance to high temperatures. Good initial bond will improve to a superior bond within hours or days after application.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 4.0 mils
Adhesion (PSTC-1 std.): 80 - 100 oz./in.
Aged: 170-180 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 60°F Minimum
Service temperature range: -40°F minimum to 400°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Backlit Application,
Bubble Free Film,
Mounting Tape,
Automotive Approved
NECAL 9072 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 9072 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and good initial tack.
Features:
NECAL 9072 will adhere to many substrates, including aluminum, brass, steel, glass, enamels and most plastics. 9072 has excellent resistance to high temperatures. Good initial bond will improve to a superior bond within hours or days after application.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): Initial: 80 - 100 oz./in. Aged: 170 – 180 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 60°F Minimum
Service temperature range: -40°F minimum to 400°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Mounting Tape
NECAL 8899-125 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-125 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-125 is primarily intended for use where extreme high performance is needed. 8899-125 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 130 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8899-110 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8899-110 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8899-110 is primarily intended for use where extreme high performance is needed. 8899-110 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 112 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
Strong Bond,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
