NECAL 8908 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8908 is a supported film of pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8908 will adhere to many substrates. 8908’s thickness gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.).
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 4.0 mils
Scrim: Non-woven polyester 2.0 mils thick
Adhesion (PSTC-1 std.): 320-350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Mounting Tape
NECAL 8808 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8808 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8808 will adhere to many substrates. 8808’s thickness gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.).
Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 9.0 mils
Scrim: 2.0 mils Non-woven polyester
Adhesion (PSTC-1 std.): 350-375 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Performance,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Mounting Tape
NECAL 8701 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8701 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8701 will adhere to many substrates.
Physical Properties:
Composition: Acrylic Adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 4.0 mils
Scrim: .00048 gauge Polyester
Adhesion (PSTC-1 std.): 200-220 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 160 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond)
NECAL 8608 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8608 is an extremely aggressive supported pressure sensitive adhesive.
Features:
NECAL 8608 was designed for adhesion to low energy surfaces (i.e. polyethylene and polypropylene) but especially for rough or textured surfaces.
Physical Properties:
Composition: Modified Acrylic Adhesive
Release liner: Available with P, or W liner
Thickness: Total construction 7.8-8.4 mil
Scrim: 2.0 mils non-woven polyester
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless steel)
Tensile (Polyester to SS, 1 sq.in.): 250 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 5 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Differential Tape,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Rough/Uneven Surface Adhesive
NECAL 8517 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8517 is a supported pressure sensitive adhesive with a general purpose modified acrylic on one side and a general purpose acrylic on the other side displaying high tack.
Features:
NECAL 8517 is designed for low energy surfaces (i.e. polyethylene and polypropylene) utilizing the acrylic side of the system. The modified acrylic side should be bonded to the nameplate only.
Physical Properties:
Composition: General purpose acrylic on one side and a modified acrylic on the other side
Release liner: Available with H, P or W liner
Thickness: Total construction 6.2-7.0 mils
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 80-100 oz./in. (Aluminum/Polypropylene)
Tensile (Polyester to SS, 1 sq.in.): 220-250 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
General Purpose,
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Differential Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond,
Mounting Tape
NECAL 8515 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8515 is a supported pressure sensitive adhesive that displays excellent bond and initial tack.
Features:
NECAL 8515 is designed for polypropylene and polyethylene. 8515 will adhere to many other substrates.
Physical Properties:
Composition: Modified Acrylic
Release liner: Available with H, P or W liner
Thickness: Total construction 5.0 mils
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 100-200 oz./in. (Aluminum/Polypropylene) 300-320 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 400-460 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy
NECAL 8502 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8502 is a supported pressure sensitive adhesive with a general purpose acrylic on one side and a modified acrylic on the other side displaying high tack.
Features:
NECAL 8502 is designed for low energy surfaces (i.e. polyethylene and polypropylene) utilizing the modified acrylic side of the system. The acrylic side should be bonded to the nameplate only.
Physical Properties:
Composition: General purpose acrylic on one side and a modified acrylic on the other side
Release liner: Available with P or W liner
Thickness: Total construction 4.0 mils
Scrim: .00048 mil polyester
Adhesion (PSTC-1 std.): 80-100 oz./in. (Aluminum/Polypropylene)
Tensile (Polyester to SS, 1 sq.in.): 230 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 300°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
General Purpose,
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Differential Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond
NECAL 8493 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8493 is a supported rubber based pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8493 will adhere to many substrates, including polyethylene and polypropylene.
Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 4 mils
Scrim: 48 gauge polyester
Adhesion (PSTC-1 std.): 60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 137 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Rubber Based,
Adhesive Transfer Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond
NECAL 8220 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8220 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8220 will adhere to many substrates.
Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: 1 mil polyester on each side for ultimate clarity
Thickness: Total construction 1.5 mils each side
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 80 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant
NECAL 8197-X Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8197-X is a supported pressure sensitive adhesive that is used exclusively in “soft touch” applications.
Features:
NECAL 8197-X shows no adhesive ooze even after extensive aging. Adhesion is good to most substrates including aluminum, steel, glass and many plastics including circuit board plastics. Good initial bond will improve within a few hours or day to a superior bond.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 1.5 mils on each side
Scrim: X (indicates total thickness with polyester film. Example: 8197-7 is a 4 mil polyester with 1.5 mils adhesive each side.)
Adhesion (PSTC-1 std.): Initial: 100-120 oz./in. Aged: 170-180 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 60°F Minimum
Service temperature range: 0°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
Temperature Resistant,
Double Linered Adhesive Transfer Tapes,
Die Cut Friendly,
Very Die Cut Friendly
