NECAL 9200 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9200 is an unsupported film of pressure sensitive adhesive that displays high initial tack and peel. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 9200 will adhere to many substrates including polyethylene and polypropylene.

Physical Properties:
Composition: Rubber based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion: 150 - 180 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.