NECAL 8493 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8493 is a supported rubber based pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8493 will adhere to many substrates, including polyethylene and polypropylene.
Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 4 mils
Scrim: 48 gauge polyester
Adhesion (PSTC-1 std.): 60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 137 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Rubber Based,
Adhesive Transfer Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond
NECAL 8392 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8392 is a polyethylene foam supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8392 will adhere to many substrates, including low energy surfaces such as polyethylene and polypropylene.
Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 16 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 50-60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
Low Surface Energy,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8292 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8292 is a polyethylene foam supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8292 will adhere to many substrates, including low energy surfaces such as polyethylene and polypropylene.
Physical Properties:
Composition: Modified Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 32 mils + or – 10%
Scrim: Black or White polyethylene closed cell foam
Adhesion (PSTC-1 std.): 50-60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i., foam failure
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
Low Surface Energy,
Rough/Uneven Surface Adhesive,
Mounting Tape,
Double Coated Foam Tape,
Automotive Approved,
Black Polyethylene Foam
NECAL 8220 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8220 is a supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8220 will adhere to many substrates.
Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: 1 mil polyester on each side for ultimate clarity
Thickness: Total construction 1.5 mils each side
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 80 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
Temperature Resistant
NECAL 8199-148FP Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8199-148FP is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8199-148FP is primarily intended for exterior use where extreme high performance is needed. An example is exterior automotive. 8199-148FP has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 143 mils total + or – 10%
Scrim: Black polyurethane foam
Adhesion: 250-300 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8199-125 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8199-125 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8199-125 is primarily intended for exterior use where extreme high performance is needed. An example is exterior automotive. 8199-125 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 130 mils total + or – 10%
Scrim: Black polyurethane foam
Adhesion: 250-300 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8199-110 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8199-110 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8199-110 is primarily intended for exterior use where extreme high performance is needed. An example is exterior automotive. 8199-110 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 112 mils total + or – 10%
Scrim: Black polyurethane foam
Adhesion: 250-300 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8199-90 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8199-90 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8199-90 is primarily intended for exterior use where extreme high performance is needed. An example is exterior automotive. 8199-90 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 92 mils total + or – 10%
Scrim: Black polyurethane foam
Adhesion: 250-300 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8199-75 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8199-75 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8199-75 is primarily intended for exterior use where extreme high performance is needed. An example is exterior automotive. 8199-75 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 80 mils total + or – 10%
Scrim: Black polyurethane foam
Adhesion: 250-300 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8199-60 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8199-60 is a foam supported pressure sensitive adhesive that exhibits very high performance.
Features:
NECAL 8199-60 is primarily intended for exterior use where extreme high performance is needed. An example is exterior automotive. 8199-60 has superior impact and vibration resistance.
Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 65 mils total + or – 10%
Scrim: Black polyurethane foam
Adhesion: 250-300 oz./in.
Tensile: 100 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Performance,
High Tack Adhesive,
Temperature Resistant,
VSB (very strong bond),
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
