---
title: NECAL 8199-148FP Adhesive
description: NECAL 8199-148FP is primarily intended for exterior use where extreme high performance is needed.  An example is exterior automotive.
---

# [![NECAL Adhesive Systems](https://www.necal.com/hs-fs/file-14830375-jpg/images/Necal-logo.jpg)](https://www.necal.com/)NECAL Adhesive Systems

![](https://www.necal.com/hs-fs/file-14830626-png/images/toll-coating.png) ![](https://www.necal.com/hs-fs/file-14829224-png/images/adhesives.png) ![](https://www.necal.com/hs-fs/file-14830465-png/images/release-liners.png) ![](https://www.necal.com/hs-fs/file-14829330-png/images/converting.png)

# Technical Data Sheets

## [NECAL 8199-148FP Adhesive](https://www.necal.com/technical-data-pages/bid/58916/NECAL-8199-148FP-Adhesive)

Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 10:50:00 AM

- [Tweet](https://twitter.com/share)

**NECAL ****8199-148FP** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14832408-doc/docs/8199-148fp.doc)

#### **Adhesive Description: **

********

******NECAL ****8199-148FP** is a foam supported pressure sensitive adhesive that exhibits very high performance.

**Features:****  
NECAL ****8199-148FP **is primarily intended for exterior use where extreme high performance is needed.  An example is exterior automotive.  **8199-148FP** has superior impact and vibration resistance.

**Physical Properties:****  
**Composition: Acrylic based adhesive  
Release liner: Available with P or W liner  
Thickness: Total construction 143 mils total + or – 10%  
Scrim: Black polyurethane foam  
Adhesion: 250-300 oz./in.  
Tensile: 100 p.s.i.  
Shear adhesion: 7 days +  
Application temperature: 50°F Minimum  
Service temperature range: -40°F minimum to 400°F maximum short term (minutes, hours) 300°F. Max. long term (days, weeks)

**Bonding Instructions:****  
**Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

**Storage:****  
**The shelf life of this material is al least two years when stored in a cool, dry place.

**Notice:****  
**The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote.

 Tags: [Foam Products](https://www.necal.com/technical-data-pages/topic/foam-products), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Single Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved), [Black Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam), [Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/polyurethane-foam)

### Browse by Tag

- [Acrylic PSA Adhesive (66)](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive)
- [Adhesive Transfer Tape (37)](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape)
- [Automotive Approved (21)](https://www.necal.com/technical-data-pages/topic/automotive-approved)
- [Backlit Application (2)](https://www.necal.com/technical-data-pages/topic/backlit-application)
- [Black Polyethylene Foam (1)](https://www.necal.com/technical-data-pages/topic/black-polyethylene-foam)
- [Black Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam)
- [Bonding Tape (3)](https://www.necal.com/technical-data-pages/topic/bonding-tape)
- [Bubble Free Film (2)](https://www.necal.com/technical-data-pages/topic/bubble-free-film)
- [Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/die-cut-friendly)
- [Differential Tape (6)](https://www.necal.com/technical-data-pages/topic/differential-tape)
- [Double Coated Foam Tape (25)](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape)
- [Double Coated Tape (34)](https://www.necal.com/technical-data-pages/topic/double-coated-tape)
- [Double Linered Adhesive Transfer Tapes (3)](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes)
- [Foam Products (28)](https://www.necal.com/technical-data-pages/topic/foam-products)
- [Gas and Detergent Resistant) (2)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant)
- [General Purpose (6)](https://www.necal.com/technical-data-pages/topic/general-purpose)
- [Heat Activated (3)](https://www.necal.com/technical-data-pages/topic/heat-activated)
- [High Performance (23)](https://www.necal.com/technical-data-pages/topic/high-performance)
- [High Performance Polyester Mask (3)](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask)
- [High Tack Adhesive (63)](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive)
- [Label Stock Product (8)](https://www.necal.com/technical-data-pages/topic/label-stock-product)
- [Laminating Adhesive (3)](https://www.necal.com/technical-data-pages/topic/laminating-adhesive)
- [Low Surface Energy (22)](https://www.necal.com/technical-data-pages/topic/low-surface-energy)
- [Low Temperature (64)](https://www.necal.com/technical-data-pages/topic/low-temperature)
- [Membrane Switch Spacer (1)](https://www.necal.com/technical-data-pages/topic/membrane-switch-spacer)
- [Mounting Tape (30)](https://www.necal.com/technical-data-pages/topic/mounting-tape)
- [Multi Purpose (3)](https://www.necal.com/technical-data-pages/topic/multi-purpose)
- [Necal Brand Products (76)](https://www.necal.com/technical-data-pages/topic/necal-brand-products)
- [Oil (1)](https://www.necal.com/technical-data-pages/topic/oil)
- [open-cell polyurethane (1)](https://www.necal.com/technical-data-pages/topic/open-cell-polyurethane)
- [Performance Label Materials (8)](https://www.necal.com/technical-data-pages/topic/performance-label-materials)
- [Polyester Open Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyester-open-cell-foam)
- [Polyethylene Closed-cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyethylene-closed-cell-foam)
- [Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/polyurethane-foam)
- [Printable Film (1)](https://www.necal.com/technical-data-pages/topic/printable-film)
- [Protective Tape Product (3)](https://www.necal.com/technical-data-pages/topic/protective-tape-product)
- [Removable Adhesive (6)](https://www.necal.com/technical-data-pages/topic/removable-adhesive)
- [Removable Tape (6)](https://www.necal.com/technical-data-pages/topic/removable-tape)
- [Repositionable Tape (1)](https://www.necal.com/technical-data-pages/topic/repositionable-tape)
- [Residue Free (6)](https://www.necal.com/technical-data-pages/topic/residue-free)
- [Rough/Uneven Surface Adhesive (34)](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive)
- [Rubber Based (7)](https://www.necal.com/technical-data-pages/topic/rubber-based)
- [Single Coated Foam Tape (26)](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape)
- [Strong Bond (25)](https://www.necal.com/technical-data-pages/topic/strong-bond)
- [Temperature Resistant (40)](https://www.necal.com/technical-data-pages/topic/temperature-resistant)
- [Thermo Bond Film (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-film)
- [Thermo Bond Product (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-product)
- [Thermo Plastic Adhesive (2)](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive)
- [UL Approved (11)](https://www.necal.com/technical-data-pages/topic/ul-approved)
- [UL Recognized (11)](https://www.necal.com/technical-data-pages/topic/ul-recognized)
- [Very Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly)
- [VSB (very strong bond) (36)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond)
- [White (1)](https://www.necal.com/technical-data-pages/topic/white)
- [White/Black (1)](https://www.necal.com/technical-data-pages/topic/whiteblack)
- [White/Black Polyethylene Close Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam)

© 2015 Necal Corporation - All Rights Reserved