NECAL 9820 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9820 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and superior tack.

Features:
NECAL 9820 will adhere to many difficult substrates, excluding polyethylene and polypropylene.  It will bond to Celcon, Nylon, Etc.  Aggressive initial bond builds into a superior bond.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 2.0 mils
Adhesion (PSTC-1 std.): 250 - 280 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): (250 g./sq.in.) 6 days
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.