NECAL 8799-30 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8799-30 is a foam supported pressure sensitive adhesive displaying excellent bond and initial tack.
Features:
NECAL 8799-30 is designed for polypropylene and polyethylene. 8799-30 adheres to many other substrates.
Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P or W liner
Thickness: Total construction 38 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425-500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8799-15 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8799-15 is a foam supported pressure sensitive adhesive displaying excellent bond and initial tack.
Features:
NECAL 8799-15 is designed for polypropylene and polyethylene. 8799-15 adheres to many other substrates.
Physical Properties:
Composition: Modified Acrylic
Release liner: Available with P or W liner
Thickness: Total construction 20 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 425-500 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Mounting Tape,
Double Coated Foam Tape,
Automotive Approved,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8608 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8608 is an extremely aggressive supported pressure sensitive adhesive.
Features:
NECAL 8608 was designed for adhesion to low energy surfaces (i.e. polyethylene and polypropylene) but especially for rough or textured surfaces.
Physical Properties:
Composition: Modified Acrylic Adhesive
Release liner: Available with P, or W liner
Thickness: Total construction 7.8-8.4 mil
Scrim: 2.0 mils non-woven polyester
Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless steel)
Tensile (Polyester to SS, 1 sq.in.): 250 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 5 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F to 270°F
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Differential Tape,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy,
Rough/Uneven Surface Adhesive
NECAL 8517 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8517 is a supported pressure sensitive adhesive with a general purpose modified acrylic on one side and a general purpose acrylic on the other side displaying high tack.
Features:
NECAL 8517 is designed for low energy surfaces (i.e. polyethylene and polypropylene) utilizing the acrylic side of the system. The modified acrylic side should be bonded to the nameplate only.
Physical Properties:
Composition: General purpose acrylic on one side and a modified acrylic on the other side
Release liner: Available with H, P or W liner
Thickness: Total construction 6.2-7.0 mils
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 80-100 oz./in. (Aluminum/Polypropylene)
Tensile (Polyester to SS, 1 sq.in.): 220-250 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
General Purpose,
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Differential Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond,
Mounting Tape
NECAL 8515 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8515 is a supported pressure sensitive adhesive that displays excellent bond and initial tack.
Features:
NECAL 8515 is designed for polypropylene and polyethylene. 8515 will adhere to many other substrates.
Physical Properties:
Composition: Modified Acrylic
Release liner: Available with H, P or W liner
Thickness: Total construction 5.0 mils
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 100-200 oz./in. (Aluminum/Polypropylene) 300-320 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 400-460 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Double Coated Tape,
High Tack Adhesive,
VSB (very strong bond),
Low Surface Energy
NECAL 8502 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8502 is a supported pressure sensitive adhesive with a general purpose acrylic on one side and a modified acrylic on the other side displaying high tack.
Features:
NECAL 8502 is designed for low energy surfaces (i.e. polyethylene and polypropylene) utilizing the modified acrylic side of the system. The acrylic side should be bonded to the nameplate only.
Physical Properties:
Composition: General purpose acrylic on one side and a modified acrylic on the other side
Release liner: Available with P or W liner
Thickness: Total construction 4.0 mils
Scrim: .00048 mil polyester
Adhesion (PSTC-1 std.): 80-100 oz./in. (Aluminum/Polypropylene)
Tensile (Polyester to SS, 1 sq.in.): 230 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 300°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
General Purpose,
Low Temperature,
Necal Brand Products,
Adhesive Transfer Tape,
Acrylic PSA Adhesive,
Differential Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond
NECAL 8493 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8493 is a supported rubber based pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8493 will adhere to many substrates, including polyethylene and polypropylene.
Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 4 mils
Scrim: 48 gauge polyester
Adhesion (PSTC-1 std.): 60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 137 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Low Temperature,
Necal Brand Products,
Rubber Based,
Adhesive Transfer Tape,
Double Coated Tape,
High Tack Adhesive,
Low Surface Energy,
Strong Bond
NECAL 8392 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8392 is a polyethylene foam supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8392 will adhere to many substrates, including low energy surfaces such as polyethylene and polypropylene.
Physical Properties:
Composition: Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 16 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion (PSTC-1 std.): 50-60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
Low Surface Energy,
Rough/Uneven Surface Adhesive,
Double Coated Foam Tape,
Black Polyurethane Foam,
Polyurethane Foam
NECAL 8292 Supported Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8292 is a polyethylene foam supported pressure sensitive adhesive displaying high tack and good creep resistance.
Features:
NECAL 8292 will adhere to many substrates, including low energy surfaces such as polyethylene and polypropylene.
Physical Properties:
Composition: Modified Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 32 mils + or – 10%
Scrim: Black or White polyethylene closed cell foam
Adhesion (PSTC-1 std.): 50-60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i., foam failure
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Single Coated Foam Tape,
Acrylic PSA Adhesive,
High Tack Adhesive,
Low Surface Energy,
Rough/Uneven Surface Adhesive,
Mounting Tape,
Double Coated Foam Tape,
Automotive Approved,
Black Polyethylene Foam
NECAL 8192 Pressure Sensitive Adhesive Print Friendly Version
Adhesive Description:
NECAL 8192 is a white or black foam supported adhesive with superior tack.
Features:
NECAL 8192 is primarily intended for applications with extremely rough substrates such as cast iron, cement, etc. 8192 has excellent impact and vibration resistance. 8192 has excellent adhesion to polyethylene and polypropylene as well as other substrates.
Physical Properties:
Composition: Rubber based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 32 mil + or – 10%
Scrim: White Polyethylene closed-cell foam
Adhesion (PSTC-1 std.): 160-170 oz./in., 80-100 to polyethylene and polypropylene
Tensile (Polyester to SS, 1 sq.in.): 65 p.s.i. foam failure
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 170°F maximum
Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate. Use firm pressure to obtain maximum contact. Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.
Storage:
The shelf life of this material is two years when stored in a cool, dry place.
Notice:
The information shown here represents typical values that may vary with each application. The values are not intended to be a performance guarantee. Users should determine, prior to use, the suitability of this material for their application.
Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.
Tags:
Foam Products,
Low Temperature,
Necal Brand Products,
Rubber Based,
Single Coated Foam Tape,
High Tack Adhesive,
UL Approved,
UL Recognized,
Low Surface Energy,
Strong Bond,
Rough/Uneven Surface Adhesive,
White/Black Polyethylene Close Cell Foam
