NECAL 9475 Pressure Sensitive Adhesive     

Adhesive Description:

NECAL 9475 is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 9475 will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness 9475 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Scrim: 1.0 mil polyester
Adhesion (PSTC-1 std.): 325 - 350 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 14 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 250°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.