Technical Data Sheets

NECAL 8899-15 Adhesive

Posted by Ed Johnson on Feb 4, 2011 11:41:00 AM

NECAL 8899-15 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8899-15 is a foam supported pressure sensitive adhesive that exhibits very high performance.

Features:
NECAL
8899-15 is primarily intended for use where extreme high performance is needed.  8899-15 has superior impact and vibration resistance.

Physical Properties:
Composition: Acrylic based Adhesive
Release liner: Available with P or W liner
Thickness: Total construction 20 mils + or – 10%
Scrim: Black polyurethane foam
Adhesion: 80-100 oz./in.
Tensile: 90 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

Tags: Foam Products, Low Temperature, Necal Brand Products, Single Coated Foam Tape, Acrylic PSA Adhesive, High Performance, High Tack Adhesive, Temperature Resistant, Strong Bond, Rough/Uneven Surface Adhesive, Mounting Tape, Double Coated Foam Tape, Black Polyurethane Foam, Polyurethane Foam