NECAL 8495 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8495 is a supported pressure sensitive adhesive displaying excellent tack.

Features:
NECAL 8495 will adhere to many substrates.  8495 is highly recommended for rough textured surfaces that have low contact areas.  It can be used where vibration deadening is required.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P or W liner
Thickness: Total construction 32 mils + or – 10%
Scrim: 30 mil polyurethane open-celled foam
Adhesion (PSTC-1 std.): 95-120 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i.
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 300°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.