Technical Data Sheets

NECAL 8292 Adhesive

Posted by Ed Johnson on Feb 4, 2011 10:56:00 AM

NECAL 8292 Supported Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8292 is a polyethylene foam supported pressure sensitive adhesive displaying high tack and good creep resistance.

Features:
NECAL
8292 will adhere to many substrates, including low energy surfaces such as polyethylene and polypropylene.

Physical Properties:
Composition: Modified Acrylic based adhesive (both sides)
Release liner: Available with P or W liner
Thickness: Total construction 32 mils + or – 10%
Scrim: Black or White polyethylene closed cell foam
Adhesion (PSTC-1 std.): 50-60 oz./in.
Tensile (Polyester to SS, 1 sq.in.): 90 p.s.i., foam failure
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

Tags: Foam Products, Low Temperature, Necal Brand Products, Single Coated Foam Tape, Acrylic PSA Adhesive, High Tack Adhesive, Low Surface Energy, Rough/Uneven Surface Adhesive, Mounting Tape, Double Coated Foam Tape, Automotive Approved, Black Polyethylene Foam