Technical Data Sheets

NECAL 5132 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:10:00 PM

NECAL 5132 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5132 is a unique thermoplastic adhesive with excellent bonding characteristics.

Features:
NECAL 5132 is designed to be resistant to blocking, so it needs no release liner.  5132 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene). In addition, 5132 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 8-12 lbs.
Thickness: Total construction 1.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, VSB (very strong bond), Heat Activated, Thermo Bond Film, Thermo Bond Product, Thermo Plastic Adhesive, Gas and Detergent Resistant)

NECAL 5130 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:06:00 PM

NECAL 5130 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5130 is a unique thermoplastic adhesive with excellent bonding characteristics. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 5130 is designed to be resistant to blocking, so it needs no release liner.  5130 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene).  In addition, 5130 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 9-14 lbs.
Thickness: Total construction 2.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, VSB (very strong bond), UL Approved, UL Recognized, Rough/Uneven Surface Adhesive, Heat Activated, Thermo Bond Film, Thermo Bond Product, Thermo Plastic Adhesive, Oil, Gas and Detergent Resistant)

NECAL 4800 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:04:00 PM

NECAL 4800 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4800 is an unsupported film of pressure sensitive adhesive which displays excellent bond and initial tack.

Features:
NECAL 4800 adheres to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness, 4800 is recommended for use on rough surfaces.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 325 - 350 oz./in. at 4.0 mils
Tensile: 180 p.s.i.
Shear adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 225°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond), Rough/Uneven Surface Adhesive

NECAL 4700 Adhesive

Posted by Ed Johnson on Feb 2, 2011 3:01:00 PM

NECAL 4700 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4700 is an unsupported film of pressure sensitive adhesive which displays excellent bond and initial tack.

Features:
NECAL 4700 is designed for bonding to polypropylene and polyethylene.  4700 adheres to many other substrates.

Physical Properties:
Composition: Modified Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 4.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 60-75 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)Tensile: 225 p.s.i.
Tensile: 225 p.s.i.
Shear adhesion: 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, VSB (very strong bond), Low Surface Energy

NECAL 4003 Adhesive

Posted by Ed Johnson on Feb 2, 2011 2:54:00 PM

NECAL 4003 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4003 is an unsupported film of pressure sensitive adhesive which displays very high tack and superior bond.

Features:
NECAL 4003 will adhere to many substrates.  It will bond to engineering plastics.  4003’s aggressive initial bond builds into a superior bond.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 2.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 80-100 oz./in.
Tensile: 100 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 300°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, High Performance, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond)

NECAL 4001 Adhesive

Posted by Ed Johnson on Feb 2, 2011 2:40:00 PM

NECAL 4001 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 4001 is an unsupported film of pressure sensitive adhesive which displays very high tack and superior bond, used only to manufacture label stock. It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).

Features:
NECAL 4001 will adhere to many substrates.  It will bond to engineering plastics.  4001’s aggressive initial bond builds into a superior bond.

Physical Properties:
Composition: Acrylic based adhesive
Release liner: Available with P, P1, W or W1 liner
Thickness: Total construction 1.0 – 2.0 mils dependent upon application
Scrim: 2 mil chrome, 2 mil brush chrome, 1 mil mylar, 2 mil mylar, and 4 mil mylar
Adhesion: 80-100 oz./in.
Tensile: 100 p.s.i.
Shear Adhesion: 7 days +
Application temperature: 50°F Minimum
Service temperature range: -40°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least one year when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.

0 Comments Click here to read/write comments

Tags: Low Temperature, Necal Brand Products, Acrylic PSA Adhesive, Label Stock Product, High Tack Adhesive, Performance Label Materials, Temperature Resistant, VSB (very strong bond), UL Approved, UL Recognized

All posts