--- title: Technical Data Pages | Rough/Uneven Surface Adhesive description: Rough/Uneven Surface Adhesive | --- # [![NECAL Adhesive Systems](https://www.necal.com/hs-fs/file-14830375-jpg/images/Necal-logo.jpg)](https://www.necal.com/)NECAL Adhesive Systems ![](https://www.necal.com/hs-fs/file-14830626-png/images/toll-coating.png) ![](https://www.necal.com/hs-fs/file-14829224-png/images/adhesives.png) ![](https://www.necal.com/hs-fs/file-14830465-png/images/release-liners.png) ![](https://www.necal.com/hs-fs/file-14829330-png/images/converting.png) # Technical Data Sheets ## [NECAL 9880 Adhesive](https://www.necal.com/technical-data-pages/bid/58980/NECAL-9880-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:30:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9880 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835879-doc/docs/9880.doc) #### **Adhesive Description: ** ******** ******NECAL** **9880** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack. **Features:**** NECAL 9880** will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness **9880** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD or VF liner Thickness: Total construction 10.0 mils Adhesion (PSTC-1 std.): 375 - 400 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58980/NECAL-9880-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved) ## [NECAL 9878 Adhesive](https://www.necal.com/technical-data-pages/bid/58978/NECAL-9878-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:28:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9878 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835817-doc/docs/9878.doc) #### **Adhesive Description: ** ******** ******NECAL** **9878** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack. **Features:**** NECAL 9878** will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness **9878** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD or VF liner Thickness: Total construction 8.0 mils Adhesion (PSTC-1 std.): 350 - 375 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58978/NECAL-9878-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9876 Adhesive](https://www.necal.com/technical-data-pages/bid/58976/NECAL-9876-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:26:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9876 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835742-doc/docs/9876.doc) #### **Adhesive Description: ** ******** ******NECAL** **9876** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack. **Features:**** NECAL 9876** will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness **9876** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD or VF liner Thickness: Total construction 6.0 mils Adhesion (PSTC-1 std.): 350 - 375 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58976/NECAL-9876-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9475 Adhesive](https://www.necal.com/technical-data-pages/bid/58964/NECAL-9475-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:15:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9475 **Pressure Sensitive Adhesive      #### **Adhesive Description: ** ******** ******NECAL ****9475** is an unsupported film of pressure sensitive adhesive displaying excellent bond and initial tack. **Features:**** NECAL ****9475 **will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness **9475** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD, or VF liner Thickness: Total construction 4.0 mils Scrim: 1.0 mil polyester Adhesion (PSTC-1 std.): 325 - 350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 14 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 250°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58964/NECAL-9475-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved) ## [NECAL 9375 Adhesive](https://www.necal.com/technical-data-pages/bid/58962/NECAL-9375-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:13:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9375 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835267-doc/docs/9375.doc) #### **Adhesive Description: ** ******** ******NECAL ****9375** is a supported film of pressure sensitive adhesive displaying excellent bond and initial tack. **Features:**** NECAL ****9375 **will adhere to many substrates including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS, and acrylic.  Because of its thickness **9375** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 4.0 mils Scrim: 1.0 mil polyester Adhesion (PSTC-1 std.): 325 - 350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 60°F Minimum Service temperature range: 0°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58962/NECAL-9375-Adhesive#comments-listing) Tags: [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9180S Adhesive](https://www.necal.com/technical-data-pages/bid/58958/NECAL-9180S-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:07:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9180S **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835037-doc/docs/9180s.doc) #### **Adhesive Description: ** ******** ******NECAL ****9180S **is a supported film of pressure sensitive adhesive displaying high tack and good creep resistance. **It is UL recognized to Standard UL 969 (PGGU2 Component - Marking and Labeling Systems Materials).** **Features:**** NECAL ****9180S **will adhere to many substrates.   The thickness of **9180S** gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.). **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 5.5 mils Scrim: Nonwoven polyester 2.0 mils thick Adhesion (PSTC-1 std.): 320 - 350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 350°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58958/NECAL-9180S-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [UL Approved](https://www.necal.com/technical-data-pages/topic/ul-approved), [UL Recognized](https://www.necal.com/technical-data-pages/topic/ul-recognized), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 8908 Adhesive](https://www.necal.com/technical-data-pages/bid/58947/NECAL-8908-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 12:50:00 PM - [Tweet](https://twitter.com/share) **NECAL ****8908 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834479-doc/docs/8908.doc) #### **Adhesive Description: ** ******** ******NECAL ****8908** is a supported film of  pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8908 **will adhere to many substrates.  **8908’s **thickness gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.). **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 4.0 mils Scrim: Non-woven polyester 2.0 mils thick Adhesion (PSTC-1 std.): 320-350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58947/NECAL-8908-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 8899-110 Adhesive](https://www.necal.com/technical-data-pages/bid/58943/NECAL-8899-110-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:51:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8899-110 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834038-doc/docs/8899-110.doc) #### **Adhesive Description: ** ******** ******NECAL ****8899-110** is a foam supported pressure sensitive adhesive that exhibits very high performance. **Features:**** NECAL ****8899-110 **is primarily intended for use where extreme high performance is needed.  **8899-110 **has superior impact and vibration resistance. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 112 mils + or – 10% Scrim: Black polyurethane foam Adhesion: 80-100 oz./in. Tensile: 90 p.s.i. Shear Adhesion: 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58943/NECAL-8899-110-Adhesive#comments-listing) Tags: [Foam Products](https://www.necal.com/technical-data-pages/topic/foam-products), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Single Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Double Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape), [Black Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam), [Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) ## [NECAL 8899-90 Adhesive](https://www.necal.com/technical-data-pages/bid/58942/NECAL-8899-90-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:50:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8899-90 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834439-doc/docs/8899-90.doc) #### **Adhesive Description: ** ******** ******NECAL ****8899-90** is a foam supported pressure sensitive adhesive that exhibits very high performance. **Features:**** NECAL ****8899-90 **is primarily intended for use where extreme high performance is needed.  **8899-90 **has superior impact and vibration resistance. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 92 mils + or – 10% Scrim: Black polyurethane foam Adhesion: 80-100 oz./in. Tensile: 90 p.s.i. Shear Adhesion: 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58942/NECAL-8899-90-Adhesive#comments-listing) Tags: [Foam Products](https://www.necal.com/technical-data-pages/topic/foam-products), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Single Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Double Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape), [Black Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam), [Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) ## [NECAL 8899-75 Adhesive](https://www.necal.com/technical-data-pages/bid/58941/NECAL-8899-75-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:48:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8899-75 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834385-doc/docs/8899-75.doc) #### **Adhesive Description: ** ******** ******NECAL ****8899-75** is a foam supported pressure sensitive adhesive that exhibits very high performance. **Features:**** NECAL ****8899-75 **is primarily intended for use where extreme high performance is needed.  **8899-75 **has superior impact and vibration resistance. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 80 mils + or – 10% Scrim: Black polyurethane foam Adhesion: 80-100 oz./in. Tensile: 90 p.s.i. Shear Adhesion: 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58941/NECAL-8899-75-Adhesive#comments-listing) Tags: [Foam Products](https://www.necal.com/technical-data-pages/topic/foam-products), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Single Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Double Coated Foam Tape](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape), [Black Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam), [Polyurethane Foam](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) [All posts](https://www.necal.com/technical-data-pages/all) [Next](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive/page/2) ### Browse by Tag - [Acrylic PSA Adhesive (66)](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive) - [Adhesive Transfer Tape (37)](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape) - [Automotive Approved (21)](https://www.necal.com/technical-data-pages/topic/automotive-approved) - [Backlit Application (2)](https://www.necal.com/technical-data-pages/topic/backlit-application) - [Black Polyethylene Foam (1)](https://www.necal.com/technical-data-pages/topic/black-polyethylene-foam) - [Black Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam) - [Bonding Tape (3)](https://www.necal.com/technical-data-pages/topic/bonding-tape) - [Bubble Free Film (2)](https://www.necal.com/technical-data-pages/topic/bubble-free-film) - [Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/die-cut-friendly) - [Differential Tape (6)](https://www.necal.com/technical-data-pages/topic/differential-tape) - [Double Coated Foam Tape (25)](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape) - [Double Coated Tape (34)](https://www.necal.com/technical-data-pages/topic/double-coated-tape) - [Double Linered Adhesive Transfer Tapes (3)](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes) - [Foam Products (28)](https://www.necal.com/technical-data-pages/topic/foam-products) - [Gas and Detergent Resistant) (2)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) - [General Purpose (6)](https://www.necal.com/technical-data-pages/topic/general-purpose) - [Heat Activated (3)](https://www.necal.com/technical-data-pages/topic/heat-activated) - [High Performance (23)](https://www.necal.com/technical-data-pages/topic/high-performance) - [High Performance Polyester Mask (3)](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask) - [High Tack Adhesive (63)](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive) - [Label Stock Product (8)](https://www.necal.com/technical-data-pages/topic/label-stock-product) - [Laminating Adhesive (3)](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) - [Low Surface Energy (22)](https://www.necal.com/technical-data-pages/topic/low-surface-energy) - [Low Temperature (64)](https://www.necal.com/technical-data-pages/topic/low-temperature) - [Membrane Switch Spacer (1)](https://www.necal.com/technical-data-pages/topic/membrane-switch-spacer) - [Mounting Tape (30)](https://www.necal.com/technical-data-pages/topic/mounting-tape) - [Multi Purpose (3)](https://www.necal.com/technical-data-pages/topic/multi-purpose) - [Necal Brand Products (76)](https://www.necal.com/technical-data-pages/topic/necal-brand-products) - [Oil (1)](https://www.necal.com/technical-data-pages/topic/oil) - [open-cell polyurethane (1)](https://www.necal.com/technical-data-pages/topic/open-cell-polyurethane) - [Performance Label Materials (8)](https://www.necal.com/technical-data-pages/topic/performance-label-materials) - [Polyester Open Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyester-open-cell-foam) - [Polyethylene Closed-cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyethylene-closed-cell-foam) - [Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) - [Printable Film (1)](https://www.necal.com/technical-data-pages/topic/printable-film) - [Protective Tape Product (3)](https://www.necal.com/technical-data-pages/topic/protective-tape-product) - [Removable Adhesive (6)](https://www.necal.com/technical-data-pages/topic/removable-adhesive) - [Removable Tape (6)](https://www.necal.com/technical-data-pages/topic/removable-tape) - [Repositionable Tape (1)](https://www.necal.com/technical-data-pages/topic/repositionable-tape) - [Residue Free (6)](https://www.necal.com/technical-data-pages/topic/residue-free) - [Rough/Uneven Surface Adhesive (34)](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive) - [Rubber Based (7)](https://www.necal.com/technical-data-pages/topic/rubber-based) - [Single Coated Foam Tape (26)](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape) - [Strong Bond (25)](https://www.necal.com/technical-data-pages/topic/strong-bond) - [Temperature Resistant (40)](https://www.necal.com/technical-data-pages/topic/temperature-resistant) - [Thermo Bond Film (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-film) - [Thermo Bond Product (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-product) - [Thermo Plastic Adhesive (2)](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive) - [UL Approved (11)](https://www.necal.com/technical-data-pages/topic/ul-approved) - [UL Recognized (11)](https://www.necal.com/technical-data-pages/topic/ul-recognized) - [Very Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly) - [VSB (very strong bond) (36)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond) - [White (1)](https://www.necal.com/technical-data-pages/topic/white) - [White/Black (1)](https://www.necal.com/technical-data-pages/topic/whiteblack) - [White/Black Polyethylene Close Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam) © 2015 Necal Corporation - All Rights Reserved