--- title: Technical Data Pages | Double Coated Tape (3) description: Double Coated Tape | (3) --- # [![NECAL Adhesive Systems](https://www.necal.com/hs-fs/file-14830375-jpg/images/Necal-logo.jpg)](https://www.necal.com/)NECAL Adhesive Systems ![](https://www.necal.com/hs-fs/file-14830626-png/images/toll-coating.png) ![](https://www.necal.com/hs-fs/file-14829224-png/images/adhesives.png) ![](https://www.necal.com/hs-fs/file-14830465-png/images/release-liners.png) ![](https://www.necal.com/hs-fs/file-14829330-png/images/converting.png) # Technical Data Sheets ## [NECAL 8908 Adhesive](https://www.necal.com/technical-data-pages/bid/58947/NECAL-8908-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 12:50:00 PM - [Tweet](https://twitter.com/share) **NECAL ****8908 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14834479-doc/docs/8908.doc) #### **Adhesive Description: ** ******** ******NECAL ****8908** is a supported film of  pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8908 **will adhere to many substrates.  **8908’s **thickness gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.). **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 4.0 mils Scrim: Non-woven polyester 2.0 mils thick Adhesion (PSTC-1 std.): 320-350 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58947/NECAL-8908-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 8808 Adhesive](https://www.necal.com/technical-data-pages/bid/58932/NECAL-8808-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:34:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8808 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833961-doc/docs/8808.doc) #### **Adhesive Description: ** ******** ******NECAL ****8808** is a supported pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8808 **will adhere to many substrates.  **8808**’**s **thickness gives good conformability to rough or uneven surfaces (i.e. mold marks, etc.). **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 9.0 mils Scrim: 2.0 mils Non-woven polyester Adhesion (PSTC-1 std.): 350-375 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58932/NECAL-8808-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Performance](https://www.necal.com/technical-data-pages/topic/high-performance), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 8701 Adhesive](https://www.necal.com/technical-data-pages/bid/58928/NECAL-8701-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:22:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8701 **Supported Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833706-doc/docs/8701.doc) #### **Adhesive Description: ** ******** ******NECAL ****8701** is a supported pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8701 **will adhere to many substrates. **Physical Properties:**** **Composition: Acrylic Adhesive (both sides) Release liner: Available with P or W liner Thickness: Total construction 4.0 mils Scrim: .00048 gauge Polyester Adhesion (PSTC-1 std.): 200-220 oz./in. Tensile (Polyester to SS, 1 sq.in.): 160 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58928/NECAL-8701-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond) ## [NECAL 8608 Adhesive](https://www.necal.com/technical-data-pages/bid/58927/NECAL-8608-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:20:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8608 **Supported Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833615-doc/docs/8608.doc) #### **Adhesive Description: ** ******** ******NECAL ****8608** is an extremely aggressive supported pressure sensitive adhesive. **Features:**** NECAL ****8608 **was designed for adhesion to low energy surfaces (i.e. polyethylene and polypropylene) but especially for rough or textured surfaces. **Physical Properties:**** **Composition: Modified Acrylic Adhesive Release liner: Available with P, or W liner Thickness: Total construction 7.8-8.4 mil Scrim: 2.0 mils non-woven polyester Adhesion (PSTC-1 std.): 120-150 oz./in. (Aluminum/Polypropylene) 340-360 oz./in. (Aluminum/Stainless steel) Tensile (Polyester to SS, 1 sq.in.): 250 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 5 days + Application temperature: 50°F Minimum Service temperature range: -20°F to 270°F **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58927/NECAL-8608-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Differential Tape](https://www.necal.com/technical-data-pages/topic/differential-tape), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive) ## [NECAL 8517 Adhesive](https://www.necal.com/technical-data-pages/bid/58925/NECAL-8517-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:17:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8517** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833511-doc/docs/8517.doc) #### **Adhesive Description: ** ******** ******NECAL ****8517** is a supported pressure sensitive adhesive with a general purpose modified acrylic on one side and a general purpose acrylic on the other side displaying high tack. **Features:**** NECAL ****8517** is designed for low energy surfaces (i.e. polyethylene and polypropylene) utilizing the acrylic side of the system.  The modified acrylic side should be bonded to the nameplate only. **Physical Properties:**** **Composition: General purpose acrylic on one side and a modified acrylic on the other side Release liner: Available with H, P or W liner Thickness: Total construction 6.2-7.0 mils Scrim: 1 mil polyester Adhesion (PSTC-1 std.): 80-100 oz./in. (Aluminum/Polypropylene) Tensile (Polyester to SS, 1 sq.in.): 220-250 oz./in. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours + Application temperature: 50°F Minimum Service temperature range: -20°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58925/NECAL-8517-Adhesive#comments-listing) Tags: [General Purpose](https://www.necal.com/technical-data-pages/topic/general-purpose), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Differential Tape](https://www.necal.com/technical-data-pages/topic/differential-tape), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 8515 Adhesive](https://www.necal.com/technical-data-pages/bid/58924/NECAL-8515-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:14:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8515** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833434-doc/docs/8515.doc) #### **Adhesive Description: ** ******** ******NECAL ****8515** is a supported pressure sensitive adhesive that displays excellent bond and initial tack. **Features:**** NECAL ****8515** is designed for polypropylene and polyethylene.  **8515** will adhere to many other substrates. **Physical Properties:**** **Composition: Modified Acrylic Release liner: Available with H, P or W liner Thickness: Total construction 5.0 mils Scrim: 1 mil polyester Adhesion (PSTC-1 std.): 100-200 oz./in. (Aluminum/Polypropylene) 300-320 oz./in. (Aluminum/Stainless) Tensile (Polyester to SS, 1 sq.in.): 400-460 oz./in. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours + Application temperature: 50°F Minimum Service temperature range: -20°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58924/NECAL-8515-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy) ## [NECAL 8502 Adhesive](https://www.necal.com/technical-data-pages/bid/58923/NECAL-8502-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:11:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8502** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833330-doc/docs/8502.doc) #### **Adhesive Description: ** ******** ******NECAL ****8502** is a supported pressure sensitive adhesive with a general purpose acrylic on one side and a modified acrylic on the other side displaying high tack. **Features:**** NECAL ****8502** is designed for low energy surfaces (i.e. polyethylene and polypropylene) utilizing the modified acrylic side of the system.  The acrylic side should be bonded to the nameplate only. **Physical Properties:**** **Composition: General purpose acrylic on one side and a modified acrylic on the other side Release liner: Available with P or W liner Thickness: Total construction 4.0 mils Scrim: .00048 mil polyester Adhesion (PSTC-1 std.): 80-100 oz./in. (Aluminum/Polypropylene) Tensile (Polyester to SS, 1 sq.in.): 230 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours + Application temperature: 50°F Minimum Service temperature range: -20°F minimum to 300°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58923/NECAL-8502-Adhesive#comments-listing) Tags: [General Purpose](https://www.necal.com/technical-data-pages/topic/general-purpose), [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Differential Tape](https://www.necal.com/technical-data-pages/topic/differential-tape), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond) ## [NECAL 8493 Adhesive](https://www.necal.com/technical-data-pages/bid/58921/NECAL-8493-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 11:03:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8493** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833231-doc/docs/8493.doc) #### **Adhesive Description: ** ******** ******NECAL ****8493** is a supported rubber based pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8493 **will adhere to many substrates, including polyethylene and polypropylene. **Physical Properties:**** **Composition: Rubber based adhesive Release liner: Available with P or W liner Thickness: Total construction 4 mils Scrim: 48 gauge polyester Adhesion (PSTC-1 std.): 60 oz./in. Tensile (Polyester to SS, 1 sq.in.): 137 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 170°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58921/NECAL-8493-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Rubber Based](https://www.necal.com/technical-data-pages/topic/rubber-based), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond) ## [NECAL 8220 Adhesive](https://www.necal.com/technical-data-pages/bid/58917/NECAL-8220-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 10:52:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8220** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14832894-doc/docs/8220.doc) #### **Adhesive Description: ** ******** ******NECAL ****8220** is a supported pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8220 **will adhere to many substrates. **Physical Properties:**** **Composition: Acrylic based adhesive (both sides) Release liner: 1 mil polyester on each side for ultimate clarity Thickness: Total construction 1.5 mils each side Scrim: 1 mil polyester Adhesion (PSTC-1 std.): 80 oz./in. Tensile (Polyester to SS, 1 sq.in.): 150 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58917/NECAL-8220-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant) ## [NECAL 8197-X Adhesive](https://www.necal.com/technical-data-pages/bid/58906/NECAL-8197-X-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 10:28:00 AM - [Tweet](https://twitter.com/share) **NECAL ****8197-X** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14832283-doc/docs/8197-x.doc) #### **Adhesive Description: ** ******** ******NECAL ****8197-X** is a supported pressure sensitive adhesive that is used exclusively in “soft touch” applications. **Features:**** NECAL ****8197-X **shows no adhesive ooze even after extensive aging.  Adhesion is good to most substrates including aluminum, steel, glass and many plastics including circuit board plastics.  Good initial bond will improve within a few hours or day to a superior bond. **Physical Properties:**** **Composition: Acrylic based adhesive Release liner: Available with P or W liner Thickness: Total construction 1.5 mils on each side Scrim: X (indicates total thickness with polyester film.  Example: 8197-7 is a 4 mil polyester with 1.5 mils adhesive each side.) Adhesion (PSTC-1 std.): Initial: 100-120 oz./in. Aged: 170-180 oz./in. Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 60°F Minimum Service temperature range: 0°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58906/NECAL-8197-X-Adhesive#comments-listing) Tags: [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [Double Linered Adhesive Transfer Tapes](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes), [Die Cut Friendly](https://www.necal.com/technical-data-pages/topic/die-cut-friendly), [Very Die Cut Friendly](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly) [Previous](https://www.necal.com/technical-data-pages/topic/double-coated-tape/page/2) [All posts](https://www.necal.com/technical-data-pages/all) [Next](https://www.necal.com/technical-data-pages/topic/double-coated-tape/page/4) ### Browse by Tag - [Acrylic PSA Adhesive (66)](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive) - [Adhesive Transfer Tape (37)](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape) - [Automotive Approved (21)](https://www.necal.com/technical-data-pages/topic/automotive-approved) - [Backlit Application (2)](https://www.necal.com/technical-data-pages/topic/backlit-application) - [Black Polyethylene Foam (1)](https://www.necal.com/technical-data-pages/topic/black-polyethylene-foam) - [Black Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam) - [Bonding Tape (3)](https://www.necal.com/technical-data-pages/topic/bonding-tape) - [Bubble Free Film (2)](https://www.necal.com/technical-data-pages/topic/bubble-free-film) - [Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/die-cut-friendly) - [Differential Tape (6)](https://www.necal.com/technical-data-pages/topic/differential-tape) - [Double Coated Foam Tape (25)](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape) - [Double Coated Tape (34)](https://www.necal.com/technical-data-pages/topic/double-coated-tape) - [Double Linered Adhesive Transfer Tapes (3)](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes) - [Foam Products (28)](https://www.necal.com/technical-data-pages/topic/foam-products) - [Gas and Detergent Resistant) (2)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) - [General Purpose (6)](https://www.necal.com/technical-data-pages/topic/general-purpose) - [Heat Activated (3)](https://www.necal.com/technical-data-pages/topic/heat-activated) - [High Performance (23)](https://www.necal.com/technical-data-pages/topic/high-performance) - [High Performance Polyester Mask (3)](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask) - [High Tack Adhesive (63)](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive) - [Label Stock Product (8)](https://www.necal.com/technical-data-pages/topic/label-stock-product) - [Laminating Adhesive (3)](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) - [Low Surface Energy (22)](https://www.necal.com/technical-data-pages/topic/low-surface-energy) - [Low Temperature (64)](https://www.necal.com/technical-data-pages/topic/low-temperature) - [Membrane Switch Spacer (1)](https://www.necal.com/technical-data-pages/topic/membrane-switch-spacer) - [Mounting Tape (30)](https://www.necal.com/technical-data-pages/topic/mounting-tape) - [Multi Purpose (3)](https://www.necal.com/technical-data-pages/topic/multi-purpose) - [Necal Brand Products (76)](https://www.necal.com/technical-data-pages/topic/necal-brand-products) - [Oil (1)](https://www.necal.com/technical-data-pages/topic/oil) - [open-cell polyurethane (1)](https://www.necal.com/technical-data-pages/topic/open-cell-polyurethane) - [Performance Label Materials (8)](https://www.necal.com/technical-data-pages/topic/performance-label-materials) - [Polyester Open Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyester-open-cell-foam) - [Polyethylene Closed-cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyethylene-closed-cell-foam) - [Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) - [Printable Film (1)](https://www.necal.com/technical-data-pages/topic/printable-film) - [Protective Tape Product (3)](https://www.necal.com/technical-data-pages/topic/protective-tape-product) - [Removable Adhesive (6)](https://www.necal.com/technical-data-pages/topic/removable-adhesive) - [Removable Tape (6)](https://www.necal.com/technical-data-pages/topic/removable-tape) - [Repositionable Tape (1)](https://www.necal.com/technical-data-pages/topic/repositionable-tape) - [Residue Free (6)](https://www.necal.com/technical-data-pages/topic/residue-free) - [Rough/Uneven Surface Adhesive (34)](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive) - [Rubber Based (7)](https://www.necal.com/technical-data-pages/topic/rubber-based) - [Single Coated Foam Tape (26)](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape) - [Strong Bond (25)](https://www.necal.com/technical-data-pages/topic/strong-bond) - [Temperature Resistant (40)](https://www.necal.com/technical-data-pages/topic/temperature-resistant) - [Thermo Bond Film (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-film) - [Thermo Bond Product (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-product) - [Thermo Plastic Adhesive (2)](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive) - [UL Approved (11)](https://www.necal.com/technical-data-pages/topic/ul-approved) - [UL Recognized (11)](https://www.necal.com/technical-data-pages/topic/ul-recognized) - [Very Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly) - [VSB (very strong bond) (36)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond) - [White (1)](https://www.necal.com/technical-data-pages/topic/white) - [White/Black (1)](https://www.necal.com/technical-data-pages/topic/whiteblack) - [White/Black Polyethylene Close Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam) © 2015 Necal Corporation - All Rights Reserved