NECAL 9512 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 9512 is a supported film of pressure sensitive adhesive displaying excellent bond and initial tack.

Features:
NECAL 9512 is designed for polypropylene and polyethylene.  9512 adheres to many other substrates.  Because of its thickness 9512 is recommended for use on rough surfaces.  It has excellent die-cutting properties.

Physical Properties:
Composition: Modified Acrylic based Adhesive
Release liner: Available with P, W, H, HD, or VF liner
Thickness: Total construction 4.0 mils
Scrim: .00048 mil Polyester
Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 225 p.s.i.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days +
Application temperature: 50°F Minimum
Service temperature range: -20°F  to 270°F

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is at least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.