--- title: Technical Data Pages --- # [![NECAL Adhesive Systems](https://www.necal.com/hs-fs/file-14830375-jpg/images/Necal-logo.jpg)](https://www.necal.com/)NECAL Adhesive Systems ![](https://www.necal.com/hs-fs/file-14830626-png/images/toll-coating.png) ![](https://www.necal.com/hs-fs/file-14829224-png/images/adhesives.png) ![](https://www.necal.com/hs-fs/file-14830465-png/images/release-liners.png) ![](https://www.necal.com/hs-fs/file-14829330-png/images/converting.png) # Technical Data Sheets ## [NECAL 8370 Adhesive](https://www.necal.com/technical-data-pages/bid/58919/NECAL-8370-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:52:00 PM - [Tweet](https://twitter.com/share) **NECAL ****8370** Supported Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833080-doc/docs/8370.doc) #### **Adhesive Description: ** ******** ******NECAL ****8370** is a supported pressure sensitive adhesive displaying high tack and good creep resistance. **Features:**** NECAL ****8370 **will adhere to many substrates. **Physical Properties:**** **Composition: Acrylic based adhesive (both sides) Release liner: Available with P or W liner Thickness: Total construction 3 mils Scrim: 48 gauge polyester Adhesion (PSTC-1 std.): 65 oz./in. Tensile (Polyester to SS, 1 sq.in.): 170 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -20°F minimum to 350°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is al least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58919/NECAL-8370-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [Strong Bond](https://www.necal.com/technical-data-pages/topic/strong-bond), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 8585 Adhesive](https://www.necal.com/technical-data-pages/bid/58926/NECAL-8585-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:49:00 PM - [Tweet](https://twitter.com/share) **NECAL ****8585** Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14833539-doc/docs/8585.doc) #### **Adhesive Description: ** ******** ******NECAL ****8585** is a supported pressure sensitive adhesive displaying excellent bond and initial tack. **Features:**** NECAL ****8585 **is designed for polypropylene and polyethylene.  **8585** adheres to many other substrates. **Physical Properties:**** **Composition: Modified Acrylic Release liner: Available with P, W, H, HD, or VF liner Thickness: Total construction 6.0 mils Scrim: .00048 Polyester Adhesion (PSTC-1 std.): 120 - 150 oz./in. (Aluminum/Polypropylene) 340 – 360 oz./in. (Aluminum/Stainless) Tensile (Polyester to SS, 1 sq.in.): 425 - 500 oz./in. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours + Application temperature: 50°F Minimum Service temperature range: -20°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58926/NECAL-8585-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL Label Stock](https://www.necal.com/technical-data-pages/bid/58984/NECAL-Label-Stock) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:45:00 PM - [Tweet](https://twitter.com/share) **NECAL ****Label Stock      **[Print Friendly Version](https://www.necal.com/hs-fs/file-2081706283-doc/docs/label-stock.doc) #### **Adhesive Description: ** ******** ******NECAL** **Label Stock** is made up of various combinations of face stocks, adhesives and 90 lb. layflat release liner which are manufactured to meet customer requirements. **Features:**** NECAL Label Stock** can be manufactured using a variety of Pressure Sensitive Adhesives, which include high temperature acrylic, low surface tension acrylic, a rubber base, general purpose acrylic and others.  It can be supplied with a variety of face stocks, which can include: .001 Brite Chrome PET, .0055 Brite or Brushed Chrome PET, .002 Brite or Brushed Chrome PET, .008 Brite or Brushed Chrome PET.  Other face stocks that those listed above may also be available. **Physical Properties:**** **Composition: Acrylic or Rubber Based Adhesive Release liner: 90 lb. polycoated release liner Thickness: Can range from ½ mil to 4 mils thick dependent upon the application. Adhesion: Dependent upon adhesive utilized Tensile: Dependent upon adhesive utilized Shear adhesion: Dependent upon adhesive utilized Application temperature: 50°F Minimum Service temperature range: -40°F minimum, Maximum temperature is dependent upon Adhesive utilized **Bonding Instructions:**** **Remove the release liner and apply to clean, dry substrate.  Use of air, hydraulic or mechanical bonding press is recommended with a pressure of 40-60 P.S.I. with a dwell time of 2 – 5 seconds to insure intimate contact is achieved between nameplate and substrate. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58984/NECAL-Label-Stock#comments-listing) Tags: [General Purpose](https://www.necal.com/technical-data-pages/topic/general-purpose), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Rubber Based](https://www.necal.com/technical-data-pages/topic/rubber-based), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Label Stock Product](https://www.necal.com/technical-data-pages/topic/label-stock-product), [Performance Label Materials](https://www.necal.com/technical-data-pages/topic/performance-label-materials), [Printable Film](https://www.necal.com/technical-data-pages/topic/printable-film) ## [NECAL B340-3220 Adhesive](https://www.necal.com/technical-data-pages/bid/58983/NECAL-B340-3220-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:43:00 PM - [Tweet](https://twitter.com/share) **NECAL ****B340-3220 **Removable Pressure Sensitive Adhesive Protective Face Mask [Print Friendly Version](https://www.necal.com/hs-fs/file-14836084-doc/docs/b340-3220.doc) #### **Adhesive Description: ** ******** ******NECAL** **B340-3220** is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface. **Physical Properties:****** Composition: Acrylic based Adhesive Carrier: 4.0 mil polyester Thickness: Total construction 1.0 mil Adhesion: 5-10 oz./in. Application temperature: 50°F Minimum Service temperature range: 0°F minimum to 120°F maximum **Bonding Instructions:**** **Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is one year when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58983/NECAL-B340-3220-Adhesive#comments-listing) Tags: [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Removable Tape](https://www.necal.com/technical-data-pages/topic/removable-tape), [Removable Adhesive](https://www.necal.com/technical-data-pages/topic/removable-adhesive), [Residue Free](https://www.necal.com/technical-data-pages/topic/residue-free), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved), [High Performance Polyester Mask](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask), [Protective Tape Product](https://www.necal.com/technical-data-pages/topic/protective-tape-product) ## [NECAL B001-3220 Adhesive](https://www.necal.com/technical-data-pages/bid/58981/NECAL-B001-3220-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:40:00 PM - [Tweet](https://twitter.com/share) **NECAL ****B001-3220 **Removable Pressure Sensitive Adhesive Protective Face Mask [Print Friendly Version](https://www.necal.com/hs-fs/file-14835946-doc/docs/b001-3220.doc) #### **Adhesive Description: ** ******** ******NECAL** **B001-3220** is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface. **Physical Properties:****** Composition: Acrylic based Adhesive Carrier: 1.0 mil polyester Thickness: Total construction 1.0 mil Adhesion: 5-10 oz./in. Application temperature: 50°F Minimum Service temperature range: 0°F minimum to 120°F maximum **Bonding Instructions:**** **Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is one year when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58981/NECAL-B001-3220-Adhesive#comments-listing) Tags: [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Removable Tape](https://www.necal.com/technical-data-pages/topic/removable-tape), [Removable Adhesive](https://www.necal.com/technical-data-pages/topic/removable-adhesive), [Residue Free](https://www.necal.com/technical-data-pages/topic/residue-free), [High Performance Polyester Mask](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask), [Protective Tape Product](https://www.necal.com/technical-data-pages/topic/protective-tape-product) ## [NECAL B340-3220 Adhesive](https://www.necal.com/technical-data-pages/bid/58982/NECAL-B340-3220-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:33:00 PM - [Tweet](https://twitter.com/share) **NECAL B340-3220**** **Removable Pressure Sensitive Adhesive Protective Face Mask [Print Friendly Version](https://www.necal.com/hs-fs/file-14836084-doc/docs/b340-3220.doc) #### **Adhesive Description: ** ******** ******NECAL** **B340-3220** is an unsupported film of removable pressure sensitive adhesive that displays good tack and adhesion but is easily removed with no residue from any surface. **Physical Properties:****** Composition: Acrylic based Adhesive Carrier: 1.0 mil polyester Thickness: Total construction 1.0 mil Adhesion: 5-10 oz./in. Application temperature: 50°F Minimum Service temperature range: 0°F minimum to 120°F maximum **Bonding Instructions:**** **Apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is one year when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58982/NECAL-B340-3220-Adhesive#comments-listing) Tags: [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Removable Tape](https://www.necal.com/technical-data-pages/topic/removable-tape), [Removable Adhesive](https://www.necal.com/technical-data-pages/topic/removable-adhesive), [Residue Free](https://www.necal.com/technical-data-pages/topic/residue-free), [High Performance Polyester Mask](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask), [Protective Tape Product](https://www.necal.com/technical-data-pages/topic/protective-tape-product) ## [NECAL 9880 Adhesive](https://www.necal.com/technical-data-pages/bid/58980/NECAL-9880-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:30:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9880 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835879-doc/docs/9880.doc) #### **Adhesive Description: ** ******** ******NECAL** **9880** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack. **Features:**** NECAL 9880** will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness **9880** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD or VF liner Thickness: Total construction 10.0 mils Adhesion (PSTC-1 std.): 375 - 400 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58980/NECAL-9880-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape), [Automotive Approved](https://www.necal.com/technical-data-pages/topic/automotive-approved) ## [NECAL 9878 Adhesive](https://www.necal.com/technical-data-pages/bid/58978/NECAL-9878-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:28:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9878 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835817-doc/docs/9878.doc) #### **Adhesive Description: ** ******** ******NECAL** **9878** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack. **Features:**** NECAL 9878** will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness **9878** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD or VF liner Thickness: Total construction 8.0 mils Adhesion (PSTC-1 std.): 350 - 375 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58978/NECAL-9878-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9876 Adhesive](https://www.necal.com/technical-data-pages/bid/58976/NECAL-9876-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:26:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9876 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835742-doc/docs/9876.doc) #### **Adhesive Description: ** ******** ******NECAL** **9876** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and initial tack. **Features:**** NECAL 9876** will adhere to most substrates, including aluminum, brass, steel, glass, enamels and plastics such as polystyrene, ABS and acrylic.  Because of its thickness **9876** is recommended for use on rough surfaces. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P, W, H, HD or VF liner Thickness: Total construction 6.0 mils Adhesion (PSTC-1 std.): 350 - 375 oz./in. Tensile (Polyester to SS, 1 sq.in.): 180 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 7 days + Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 225°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58976/NECAL-9876-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [Temperature Resistant](https://www.necal.com/technical-data-pages/topic/temperature-resistant), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Rough/Uneven Surface Adhesive](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) ## [NECAL 9820 Adhesive](https://www.necal.com/technical-data-pages/bid/58975/NECAL-9820-Adhesive) Posted by [Ed Johnson](https://www.necal.com/technical-data-pages/author/ed-johnson) on Feb 4, 2011 1:23:00 PM - [Tweet](https://twitter.com/share) **NECAL ****9820 **Pressure Sensitive Adhesive      [Print Friendly Version](https://www.necal.com/hs-fs/file-14835670-doc/docs/9820.doc) #### **Adhesive Description: ** ******** ******NECAL** **9820** is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics and superior tack. **Features:**** NECAL 9820** will adhere to many difficult substrates, excluding polyethylene and polypropylene.  It will bond to Celcon, Nylon, Etc.  Aggressive initial bond builds into a superior bond. **Physical Properties:**** **Composition: Acrylic based Adhesive Release liner: Available with P or W liner Thickness: Total construction 2.0 mils Adhesion (PSTC-1 std.): 250 - 280 oz./in. Tensile (Polyester to SS, 1 sq.in.): 130 p.s.i. Shear adhesion (Polyester to SS, 1000 grams/sq.in.): (250 g./sq.in.) 6 days Application temperature: 50°F Minimum Service temperature range: -40°F minimum to 195°F maximum **Bonding Instructions:**** **Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds. **Storage:**** **The shelf life of this material is at least two years when stored in a cool, dry place. **Notice:**** **The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application. Please contact [NECAL Corporation](https://www.necal.com/contact-us-0/) to discuss your project/application, seek additional information, receive a free sample or request a quote. 0 Comments [Click here to read/write comments](https://www.necal.com/technical-data-pages/bid/58975/NECAL-9820-Adhesive#comments-listing) Tags: [Low Temperature](https://www.necal.com/technical-data-pages/topic/low-temperature), [Necal Brand Products](https://www.necal.com/technical-data-pages/topic/necal-brand-products), [Adhesive Transfer Tape](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape), [Acrylic PSA Adhesive](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive), [Double Coated Tape](https://www.necal.com/technical-data-pages/topic/double-coated-tape), [High Tack Adhesive](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive), [VSB (very strong bond)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond), [Low Surface Energy](https://www.necal.com/technical-data-pages/topic/low-surface-energy), [Mounting Tape](https://www.necal.com/technical-data-pages/topic/mounting-tape) [All posts](https://www.necal.com/technical-data-pages/all) [Next](https://www.necal.com/technical-data-pages/page/2) ### Browse by Tag - [Acrylic PSA Adhesive (66)](https://www.necal.com/technical-data-pages/topic/acrylic-psa-adhesive) - [Adhesive Transfer Tape (37)](https://www.necal.com/technical-data-pages/topic/adhesive-transfer-tape) - [Automotive Approved (21)](https://www.necal.com/technical-data-pages/topic/automotive-approved) - [Backlit Application (2)](https://www.necal.com/technical-data-pages/topic/backlit-application) - [Black Polyethylene Foam (1)](https://www.necal.com/technical-data-pages/topic/black-polyethylene-foam) - [Black Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/black-polyurethane-foam) - [Bonding Tape (3)](https://www.necal.com/technical-data-pages/topic/bonding-tape) - [Bubble Free Film (2)](https://www.necal.com/technical-data-pages/topic/bubble-free-film) - [Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/die-cut-friendly) - [Differential Tape (6)](https://www.necal.com/technical-data-pages/topic/differential-tape) - [Double Coated Foam Tape (25)](https://www.necal.com/technical-data-pages/topic/double-coated-foam-tape) - [Double Coated Tape (34)](https://www.necal.com/technical-data-pages/topic/double-coated-tape) - [Double Linered Adhesive Transfer Tapes (3)](https://www.necal.com/technical-data-pages/topic/double-linered-adhesive-transfer-tapes) - [Foam Products (28)](https://www.necal.com/technical-data-pages/topic/foam-products) - [Gas and Detergent Resistant) (2)](https://www.necal.com/technical-data-pages/topic/gas-and-detergent-resistant) - [General Purpose (6)](https://www.necal.com/technical-data-pages/topic/general-purpose) - [Heat Activated (3)](https://www.necal.com/technical-data-pages/topic/heat-activated) - [High Performance (23)](https://www.necal.com/technical-data-pages/topic/high-performance) - [High Performance Polyester Mask (3)](https://www.necal.com/technical-data-pages/topic/high-performance-polyester-mask) - [High Tack Adhesive (63)](https://www.necal.com/technical-data-pages/topic/high-tack-adhesive) - [Label Stock Product (8)](https://www.necal.com/technical-data-pages/topic/label-stock-product) - [Laminating Adhesive (3)](https://www.necal.com/technical-data-pages/topic/laminating-adhesive) - [Low Surface Energy (22)](https://www.necal.com/technical-data-pages/topic/low-surface-energy) - [Low Temperature (64)](https://www.necal.com/technical-data-pages/topic/low-temperature) - [Membrane Switch Spacer (1)](https://www.necal.com/technical-data-pages/topic/membrane-switch-spacer) - [Mounting Tape (30)](https://www.necal.com/technical-data-pages/topic/mounting-tape) - [Multi Purpose (3)](https://www.necal.com/technical-data-pages/topic/multi-purpose) - [Necal Brand Products (76)](https://www.necal.com/technical-data-pages/topic/necal-brand-products) - [Oil (1)](https://www.necal.com/technical-data-pages/topic/oil) - [open-cell polyurethane (1)](https://www.necal.com/technical-data-pages/topic/open-cell-polyurethane) - [Performance Label Materials (8)](https://www.necal.com/technical-data-pages/topic/performance-label-materials) - [Polyester Open Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyester-open-cell-foam) - [Polyethylene Closed-cell Foam (1)](https://www.necal.com/technical-data-pages/topic/polyethylene-closed-cell-foam) - [Polyurethane Foam (21)](https://www.necal.com/technical-data-pages/topic/polyurethane-foam) - [Printable Film (1)](https://www.necal.com/technical-data-pages/topic/printable-film) - [Protective Tape Product (3)](https://www.necal.com/technical-data-pages/topic/protective-tape-product) - [Removable Adhesive (6)](https://www.necal.com/technical-data-pages/topic/removable-adhesive) - [Removable Tape (6)](https://www.necal.com/technical-data-pages/topic/removable-tape) - [Repositionable Tape (1)](https://www.necal.com/technical-data-pages/topic/repositionable-tape) - [Residue Free (6)](https://www.necal.com/technical-data-pages/topic/residue-free) - [Rough/Uneven Surface Adhesive (34)](https://www.necal.com/technical-data-pages/topic/roughuneven-surface-adhesive) - [Rubber Based (7)](https://www.necal.com/technical-data-pages/topic/rubber-based) - [Single Coated Foam Tape (26)](https://www.necal.com/technical-data-pages/topic/single-coated-foam-tape) - [Strong Bond (25)](https://www.necal.com/technical-data-pages/topic/strong-bond) - [Temperature Resistant (40)](https://www.necal.com/technical-data-pages/topic/temperature-resistant) - [Thermo Bond Film (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-film) - [Thermo Bond Product (3)](https://www.necal.com/technical-data-pages/topic/thermo-bond-product) - [Thermo Plastic Adhesive (2)](https://www.necal.com/technical-data-pages/topic/thermo-plastic-adhesive) - [UL Approved (11)](https://www.necal.com/technical-data-pages/topic/ul-approved) - [UL Recognized (11)](https://www.necal.com/technical-data-pages/topic/ul-recognized) - [Very Die Cut Friendly (3)](https://www.necal.com/technical-data-pages/topic/very-die-cut-friendly) - [VSB (very strong bond) (36)](https://www.necal.com/technical-data-pages/topic/vsb-very-strong-bond) - [White (1)](https://www.necal.com/technical-data-pages/topic/white) - [White/Black (1)](https://www.necal.com/technical-data-pages/topic/whiteblack) - [White/Black Polyethylene Close Cell Foam (1)](https://www.necal.com/technical-data-pages/topic/whiteblack-polyethylene-close-cell-foam) © 2015 Necal Corporation - All Rights Reserved