NECAL 8515 Pressure Sensitive Adhesive      Print Friendly Version

Adhesive Description:

NECAL 8515 is a supported pressure sensitive adhesive that displays excellent bond and initial tack.

Features:
NECAL 8515 is designed for polypropylene and polyethylene.  8515 will adhere to many other substrates.

Physical Properties:
Composition: Modified Acrylic
Release liner: Available with H, P or W liner
Thickness: Total construction 5.0 mils
Scrim: 1 mil polyester
Adhesion (PSTC-1 std.): 100-200 oz./in. (Aluminum/Polypropylene) 300-320 oz./in. (Aluminum/Stainless)
Tensile (Polyester to SS, 1 sq.in.): 400-460 oz./in.
Shear adhesion (Polyester to SS, 1000 grams/sq.in.): 24 hours +
Application temperature: 50°F Minimum
Service temperature range: -20°F minimum to 195°F maximum

Bonding Instructions:
Remove the release liner and apply mask to clean, dry substrate.  Use firm pressure to obtain maximum contact.  Use of air, hydraulic or mechanical bonding press is recommended with pressure of 40-60 p.s.i. with dwell time of 2-5 seconds.

Storage:
The shelf life of this material is al least two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.