NECAL 5132 Heat Activated Adhesive      Print Friendly Version

Adhesive Description:

NECAL 5132 is a unique thermoplastic adhesive with excellent bonding characteristics.

Features:
NECAL 5132 is designed to be resistant to blocking, so it needs no release liner.  5132 has the unique capability of bonding to a wide variety of substrates, including; glass, wood, aluminum, steel, brass, various cloths and leathers, and most plastics (ABS, styrene, nylon, celcon, polyethylene, and polypropylene). In addition, 5132 has excellent resistance to water, oil, gas, and most detergents and has excellent low temperature properties.

Physical Properties:
Adhesion: Aluminum to ABS 8-12 lbs.
Thickness: Total construction 1.5 mils
Tensile (Polyester to SS, 1 sq.in.): 300 p.s.i.
Service temperature range: -60°F minimum to 190°F maximum

Bonding Instructions:
Use pressure, 40-60 p.s.i., for 1.5 – 10 seconds dependent upon substrate.  It is essential that the glue line be between 300° - 350°F for bond to develop.  Keep in mind the heat sink effect of the substrate. It may be necessary to preheat the substrate or increase temperature and/or dwell time.

Storage:
The shelf life of this material is two years when stored in a cool, dry place.

Notice:
The information shown here represents typical values that may vary with each application.  The values are not intended to be a performance guarantee.  Users should determine, prior to use, the suitability of this material for their application.

Please contact NECAL Corporation to discuss your project/application, seek additional information, receive a free sample or request a quote.